Advanced Search

ISSN1001-3806 CN51-1125/TN Map

Volume 39 Issue 1
Nov.  2014
Article Contents
Turn off MathJax

Citation:

Anti-wave demodulation method for acousto-optic coupling fiber hydrophones on the water surface

  • Corresponding author: JIN Xiaofeng, jinxf00@zju.edu.cn
  • Received Date: 2014-03-31
    Accepted Date: 2014-04-02
  • A novel method was put forward to weaken the signal fading phenomenon of an acousto-optic coupling fiber optic hydrophone on the water surface when the water fluctuates. The method compensated the signal amplitude by detecting the light intensity of the signal arm. The amendment process of demodulation signal was analysed in theory and bynumerical simulation. A fiber optic hydrophone system based on /2 phase demodulation technique was constructed to test the water constant vibration signal. The results show that, compared with the original demodulation signal, the amplitude of the amended signal is stabilized and increased by 5dB wholly. The distortion degree is reduced, the phase noise is suppressed, the signal to noise ratio is improved and the time range of the identifiable signal is extended to 3.5 times. This method can overcome the signal fading phenomenon caused by surface fluctuation effectively, optimize the signal quality and enhance the ability of anti-wave demodulation for the system.
  • 加载中
  • [1]

    HOU J F, PEI L, LI Z X, et al. Development and application of optical fiber sensing technology[J].Electro-Optic Technology Application, 2012, 27(1): 49-53 (in Chinese).
    [2]

    LIN Z H, LI C F, LIU J C. Optical fiber sensing technology and its application in militarily[J]. Optical Communication Technology, 2011, 35(7): 4-6 (in Chinese).
    [3]

    KIRKENDALL C K, DANDRIDGE A. Overview of high performance fibre-optic sensing[J]. Journal of Physics, 2004,D37(18):197-216.
    [4]

    ZHANG R H, NI M. Principle and applications of the fiber optic hydrophone[J]. Physics, 2004, 33(7): 503-507 (in Chinese).
    [5]

    WANG Z L, LUO H, HU Y M. Signal detection technique for fiber-optic inteferometric sensors[J]. Journal of Applied Optics, 2007, 28(1): 86-91 (in Chinese).
    [6]

    CAMPOPIANO S, CUTOLO A, CUSANO A, et al. Underwater acoustic sensors based on fiber Bragg gratings[J]. Sensors, 2009, 9(6): 4446-4454.
    [7]

    MOCCIA M, PISCO M, CUTOLO A, et al. Opto-acoustic behavior of coated fiber Bragg gratings[J]. Optics Express, 2011, 19(20): 18842-18860.
    [8]

    NI M, LI X L, ZHANG R H, et al. Seatests of an all-optical fiber-optic hydrophone system[J]. Acta Acustica, 2004, 29(6): 539-543 (in Chinese).
    [9]

    BLACKMON F, ANTONELLI L. Experimental detection and reception performance for uplink underwater acoustic communication using a remote, in-air, acousto-optic sensor[J]. Oceanic Engineering, 2006, 31(1): 179-187.
    [10]

    ANTONELLI L, BLACKMON F. Experimental demonstration of remote,passive acousto-optic sensing[J].Acoustical Society of America, 2004, 116(6): 3393-3403.
    [11]

    JIN X F, OU J H, HAO R, et al. Novel demodulation method for fiber-optic interferometers based on /2 phase modulation[J]. Photonics Technology, 2012, 24(22): 1981-1983.
  • 加载中
通讯作者: 陈斌, bchen63@163.com
  • 1. 

    沈阳化工大学材料科学与工程学院 沈阳 110142

  1. 本站搜索
  2. 百度学术搜索
  3. 万方数据库搜索
  4. CNKI搜索

Article views(3179) PDF downloads(458) Cited by()

Proportional views

Anti-wave demodulation method for acousto-optic coupling fiber hydrophones on the water surface

    Corresponding author: JIN Xiaofeng, jinxf00@zju.edu.cn
  • 1. Department of Information & Electronics Engineering, Zhejiang University, Hangzhou 310027, China

Abstract: A novel method was put forward to weaken the signal fading phenomenon of an acousto-optic coupling fiber optic hydrophone on the water surface when the water fluctuates. The method compensated the signal amplitude by detecting the light intensity of the signal arm. The amendment process of demodulation signal was analysed in theory and bynumerical simulation. A fiber optic hydrophone system based on /2 phase demodulation technique was constructed to test the water constant vibration signal. The results show that, compared with the original demodulation signal, the amplitude of the amended signal is stabilized and increased by 5dB wholly. The distortion degree is reduced, the phase noise is suppressed, the signal to noise ratio is improved and the time range of the identifiable signal is extended to 3.5 times. This method can overcome the signal fading phenomenon caused by surface fluctuation effectively, optimize the signal quality and enhance the ability of anti-wave demodulation for the system.

Reference (11)

Catalog

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return