Ball bearing measurement based on white-light interferometry technique
-
1.
School of Mechanical Engineering, Inner Mongolia University of Science and Technology, Baotou 014010, China;
-
2.
Department of Applied Optics, School of Physics Science, Canterbury University, Canterbury, United Kingdom
-
Received Date:
2013-10-11
Accepted Date:
2013-10-30
-
Abstract
In order to achieve rapid and accurate measurement of sphere bearing ball during manufacturing process, a set of Michelson interferometer measurement system was proposed based on white light interferometer technology, image processing technology and signal processing technology. White light interferometry technique was analyzed theoretically. The precision and roughness measurement of the optical spherical radius of sphere ball bearing were made. The finish resolution image and the curvature radius image were obtained. The accurate calculation data was obtained after processing a large number of experimental data. The finish resolution can reach the nm level and the curvature can be calculated to the μm level. The processing quality and the detection speed are improved.
-
-
References
[1]
|
ZHAO X H, QU X H, YE Sh H.MEMS optical detection method and apparatus[J].Optical Technique,2003,29(2):197-200(in Chinese). |
[2]
|
CHEN X M,LONG Z H.Fringe interference microscope to measure the surface roughness of the automatic processing[J].Acta Photonica Sinica,1993,13(11):1040-1044(in Chinese). |
[3]
|
PLESEA V, PODOLEANU A G.Direct corneal elevation measurements using multiple delay en-face OCT[J].Journal of Biomedical Optics,2008,13(5):054054. |
[4]
|
LIU J F.Optical probe surface roughness measurement technique.Tianjin:Tianjin Universtiy,1999:45-46(in Chinese). |
[5]
|
LI G S,LI Q,CHEN Zh M.Measurement of FBG reflection spectra by white light interferometry[J].Laser Technoloy, 2013,37(1):20-23(in Chinese). |
[6]
|
CHANG S P.Based on size and morphology of white light interference contour method and system for non-contact measurement.Wuhan:Huazhong University of Science and Technology,2007:37-39(in Chinese). |
[7]
|
CHENG Y Y, WYANT J C.Phase shifter calibration in phase-shifting interferometry[J].Appllied Optics,1985,24(18):3049-3052. |
[8]
|
MURALIKRISHNAN B,RAJA J.Computational surface and roundness metrology[M].New York, USA:Springer,2008:155-157. |
[9]
|
LE Y F,SHI Y,JU A S.Design of heterodyne interferometer signal detectors[J].Laser Technology,2012,36(6):759-762(in Chinese). |
[10]
|
BRINKMANN S, BODSCHWINNA H, LEMKE H W.Development of robust Gaussian regression filter for three dimensional surface analysis//Proceeding of the 10th International Colloquium on Surfaces.New York,USA:IEEE,2000:122-131. |
-
-
Proportional views
-