Error analysis of thread measurement with machine vision
-
Received Date:
2013-03-11
Accepted Date:
2013-04-27
-
Abstract
In order to improve measuring precision of thread based on machine vision, tangential and vertical projection measuring methods were discussed in theory, and verified experimentally, mainly related to the matter of extending helicoidal surface shade error when measuring thread profile with both the methods. After introducing the tangential and vertical projection measurement methods, the error sources were analyzed which cause principle error in measuring thread. The shade error calculating formula was given that caused from measuring thread with vertical projection measurement, and the effect that the shade error and the error caused by different lead angle was studied in measuring thread profile experiments. The result shows that the helix angle measurement error caused by extend helicoids shade error can reached over 1°when measuring larger-size helical pitch by vertical projection measurement, it can't be ignored for helix angle measurement.
-
-
References
|
[1]
|
SUN S H. The key technique of computer vision measurement and application in automatic detection[D].Tianjin:Tianjin University, 2007:5-6(in Chinese). |
|
[2]
|
HE F J, ZHANG R J, LANG S, et al.Linear array based external taper thread measurements[C]//3rd International Symposium on Instrumentiong Science and Technology.Xi'an, China: Foreign Language Press, 2004:1274-1278. |
|
[3]
|
SHEN S W, YAN S H, ZHOU C L, et al.Research based on the CCD vision thread parameters automatic detection technology[C]//The Eighth International Conference on Electronic Measurement and Instruments, ICEMI'2007.Xi'an, China:Institute of Electrical and Electronics Engineers, 2007:969-973. |
|
[4]
|
WANG W Q, SHAO D X, JIANG J F, et al.research on optical microscope measuring method of external thread parameters based on charge-couple device[J]. Applied Mechanics and Material, 2012, 163(4):39-43. |
|
[5]
|
PERNG D B, CHEN S H, CHANG Y S.A novel internal thread defect auto-inspection system[J].International Journal of Advanced Manufacturing Technology, 2010, 47(8):731-743. |
|
[6]
|
TONG Q B, DING Z L, CHEN J C, et al.The research of screw thread parameter measurement based on position sensitive detector and laser[C]//International Symposium on Instrumentation Science and Technology, Journal of Physics Conference Series. Bristol, Britrish:Institute of Physics Publishing, 2006:561-565. |
|
[7]
|
HUNSICKER R J, PATTEN J, LEDFORD A, et al. Automatic vision inspection and measurement system for external screw threads[J]. Journal of Manufacturing Systems, 2005, 13(5):370-384. |
|
[8]
|
WANG S K. Bimodality of helicoidal tooth profile measuring result with image measurement[J]. Shaanxi Mechanical College Journal, 1992, 8(4):229-233(in Chinese). |
|
[9]
|
XU X E. Screw thread detection and measurement[M].Beijing:Metrology Press, 1984:218-222, 231-234(in Chinese). |
|
[10]
|
LU D F.Study of laser detection technology for screw thread parameter[D].Harbin: Harbin Institute of Technology, 2007:20-23(in Chinese). |
|
[11]
|
NELLO Z.Understanding and applying machihe vision[M].New York, USA:Library of Congress Cataloging in Publication, 2000:83-86. |
|
[12]
|
SACO R.Measurement of oil pipe threads using artificial vision[C]//Intelligent Components and Instruments for Control Applications. Buenos Aires, Argentian:SPIE, 2000:203-208. |
|
[13]
|
WANG S K. Theoretical error of measuring screw bar with iamge measurement[J]. Shaanxi Mechanical College Journal, 1983, 1(2):95-105(in Chinese). |
|
[14]
|
CHEN M L. Vertical projection measuring method for male thread and its application analysis[J]. Laser Technology, 2012, 36(6):793-797(in Chinese). |
-
-
Proportional views
-
Map
DownLoad: