Advanced Search

ISSN1001-3806 CN51-1125/TN Map

Volume 38 Issue 1
Dec.  2013
Article Contents
Turn off MathJax

Citation:

Optimization of dispersion compensation in optical fiber communication systems

  • Received Date: 2013-03-19
    Accepted Date: 2013-04-25
  • In order to compensate dispersion in an optical communication system, a single channel dispersion compensation system which used of dispersion compensating fiber was designed and simulated. The system was optimized by a fiber loop mirror so that it economized the cost, and the effect of dispersion compensation was fine. The simulation results such as Q factor and eye diagram were given and analyzed in this system with different velocity of 2.5Gbit/s and 10Gbit/s, and their input power were obtained. When the system's velocity is 2.5Gbit/s, the optimum input power is 13dBm, and Q factor is 172.88; When the system's velocity is 10Gbit/s, the input power is 6dBm and the corresponding Q factor is 45.96. The obtained results are helpful for the application of dispersion compensation in an optical communication system.
  • 加载中
  • [1]

    LI J. A dispersion compensation structure based on dual-cavity G-T interferometer[D].Wahan:Huazhong University of Science & Technology, 2007:1 (in Chinese).
    [2]

    GONG Q, XU R, YE X H, et al. High-speed ultra-long haul optical transmission technologies[M]. Beijing: Posts & Telecommunication Press, 2005: 88(in Chinese).
    [3]

    GU W Y, WEN H, YU S, et al. WDM ultra-long optical transmission technologies[M]. Beijing: Beijing University of Post Telecommunication Press, 2006:110-122 (in Chinese).
    [4]

    WU W L, QIU Q. Research of the technology of compensating single mode fiber dispersion by high-order mode[J]. Laser Techno-logy, 2004, 28(3): 303-311 (in Chinese).
    [5]

    WANG Ch, RAO M, TANG R, et al. The performance of the DCF transmission system[J]. Journal of Applied Sciences, 2003, 21(2): 177-181 (in Chinese).
    [6]

    PAN Q, WEN A J. Comparison in 40Gb/s single channel RZ modulation formats optical transmission dispersion compensating system[J]. Optical Communication Technology, 2006, 30(8): 61-62 (in Chinese).
    [7]

    ZHOU Zh Q, TANG Y L, XIE Ch J. Optimum schemes of dispersion compensation transmission systems using dispersion compensation fibers[J]. Laser Technology, 2000, 24(5): 265-269 (in Chinese).
    [8]

    XI C L. Study on S+C+L ultra broadband light sources[J]. Laser Technology, 2012, 36(6): 822-824 (in Chinese).
    [9]

    FU J. The application research on dispersion compensation technology in wavelength division multiplexing[D].Shenyang:Northestern University, 2008:16 (in Chinese).
    [10]

    MORTIMORE D B. Fiber loop reflectors[J]. Journal of Lightwave Technology, 1988, 6(7): 1217-1224.
    [11]

    CAO X. Research of active interrogating based on FLM and FBG.Harbin:Heilongjiang University, 2007: 20-28(in Chinese).
    [12]

    YANG Y J, HOU L, GUO Sh J. 32×10Gbit dense wavelength division multiplexing system simulation[J]. Optical Communication Technology, 2009, 33(11): 23-25(in Chinese).
    [13]

    YU Y L, TAM H, GENG Sh W, et al. Chirp-free tuning of fiber Bragg grating using a cantilever beam[J]. Japanese Journal of Applied Physics, 1999, 38(9): 1032-1034.
    [14]

    LI L, CAI H W, ZHAO L, et al. Progress of tunable dispersion compensation[J]. Laser Technology, 2002, 26(3): 194-197 (in Chinese).
    [15]

    WEI J J, LIANG Y P, DAI T L. Numerical analysis of reflection spectrum of linearly chirped fiber Bragg gratings[J]. Laser Technology, 2012, 36(5): 607-611 (in Chinese).
    [16]

    MAN W Q, PENG J. Numerical analysis and design of superimposed multi-wavelength fiber Bragg gratings[J]. Laser Technology, 2007, 31(3): 235-237 (in Chinese).
  • 加载中
通讯作者: 陈斌, bchen63@163.com
  • 1. 

    沈阳化工大学材料科学与工程学院 沈阳 110142

  1. 本站搜索
  2. 百度学术搜索
  3. 万方数据库搜索
  4. CNKI搜索

Article views(3241) PDF downloads(695) Cited by()

Proportional views

Optimization of dispersion compensation in optical fiber communication systems

  • 1. Department of Communication Engineering, School of Physics and Electronics, Henan University, Kaifeng 475004, China

Abstract: In order to compensate dispersion in an optical communication system, a single channel dispersion compensation system which used of dispersion compensating fiber was designed and simulated. The system was optimized by a fiber loop mirror so that it economized the cost, and the effect of dispersion compensation was fine. The simulation results such as Q factor and eye diagram were given and analyzed in this system with different velocity of 2.5Gbit/s and 10Gbit/s, and their input power were obtained. When the system's velocity is 2.5Gbit/s, the optimum input power is 13dBm, and Q factor is 172.88; When the system's velocity is 10Gbit/s, the input power is 6dBm and the corresponding Q factor is 45.96. The obtained results are helpful for the application of dispersion compensation in an optical communication system.

Reference (16)

Catalog

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return