Experimental study about dressing bronze-bonded diamond grinding wheels with pulsed fiber laser
-
1.
State Key Laboratory of Advanced Design and Manufacturing for Vehicle Body, Hunan University, Changsha 410082, China;
-
2.
Laser Research Institute, Hunan University, Changsha 410082, China
-
Received Date:
2013-02-04
Accepted Date:
2013-03-04
-
Abstract
In order to find a new method to dress super-abrasive grinding wheels, experiments were carried out on bronze-bonded diamond grinding wheels with a pulsed fiber laser irradiating in radial orientation. Its basic principle was analyzed. After the ablation of bronze-bonded wheel by means of a pulsed fiber laser, the surface morphology and depth of ablated craters were observed by 3-D video microscopy system with super depth of field and surfagauge, and the influences of laser average power, pulse repetition frequency and defocusing amount on the ablation effect were summarized. According to the experimental results, the laser dressing experiments were carried out with the best process parameters(Pm=20W, f=70kHz,Δ=0.0mm), and the surface topography after laser dressing was observed by a 3-D video microscopy system with super depth of field. The results show that, dressing of bronze-bonded diamond grinding wheels with a pulsed fiber laser irradiating in radial orientation can bring out good dressing effect with the reasonable processing parameters.
-
-
References
|
[1]
|
XIE X Z, CHEN G Y, LI L J. Dressing of resin-bonded superabrasive grinding wheels by means of acousto-optic Q-switched pulsed Nd:YAG laser[J]. Optics & Laser Technology,2004,36(1): 409-419(in Chinese). |
|
[2]
|
KANG R K, YUAN J T, SHI X K, et al. Study on laser dressing of superabrasive grinding wheels[J]. China Mechanical Engineering,2000,5(11): 493-496(in Chinese). |
|
[3]
|
DOLD C, TRANSCHEL R, RABIEY M, et al. A study on laser touch dressing of electroplated diamond wheels using pulsed picosecond laser sources[J]. CIRP Annals—Manufacturing Technology,2011,60(1): 363-366. |
|
[4]
|
HOSOKAWA A, UEDA T, YUNOKI T. Laser dressing of metal bonded diamond wheel[J]. CIRP Annals—Manufacturing Technology,2006,55(1): 329-332. |
|
[5]
|
CHEN M, SUN F H, LIU G L, et al. Theoretical and experimental research on generation mechanism of grinding wheel topography by laser dressing and 3-D laser scanning[J]. Key Engineering Materials,2003,223(2): 497-502. |
|
[6]
|
WALTER C, RABIEY M, WARHANEK M, et al. Dressing and truing of hybrid bonded CBN grinding tools using a short-pulsed fibre laser[J]. CIRP Annals—Manufacturing Technology,2012,61(1):279-282. |
|
[7]
|
ZUO D W, KAWANO Y, YAMASHITA T, et al. Effect of CO2 pulsed laser scanning on diamond wheel pieces[J].Chinese Journal of Mechanical Engineering,2009,35(2): 42-45(in Chinese). |
|
[8]
|
SUN K J, CHEN G Y, YU C R, et al. Selection of equipment and parameters used in laser truing and dressing grinding wheels[J]. Laser Technology,2011,35(6): 721-724(in Chinese). |
|
[9]
|
WANG X Y, JI C P, KANG R K, et al. Experimental research on laser dressing of bronze bond diamond grinding wheel[J]. Journal of Dalian University of Technology,2007,47(6): 823-828(in Chinese). |
|
[10]
|
CHEN G Y, CHEN C, BU C, et al. Numerical simulation and experiment for on-line truing and dressing of bronze-bonded diamond grinding wheels with laser[J]. Laser Technology,2012,36(4): 433-437(in Chinese). |
|
[11]
|
CHEN G Y, MEI L F, ZHANG B, et al. Experiment and numerical simulation study on laser truing and dressing of bronze-bonded diamond wheel[J]. Optics and Lasers in Engineering,2010,48(3): 295-304. |
|
[12]
|
CHEN G Y. The research on mechanism and technology for laser truing and dressing of bronze-bonded diamond grinding wheels by acoustic-optic Q-switched Nd:YAG pulsed laser[D]. Changsha: Hunan University,2006: 28-34(in Chinese). |
-
-
Proportional views
-
Map
DownLoad: