Design of laser peening CNC systems based on motion control card
-
Received Date:
2011-12-28
Accepted Date:
2012-03-02
-
Abstract
To realize the electromechanical integration of the laser and operating platform and bring convenience to the user,a design of computerized numerical control system for laser peening based on motion control card was presented.PC achieved the control to the core part of system,the motion control card and the single-chip microcomputer achieved the control to the details.Then the structure of the hardware and the partition of the software were reviewed.The system is proved to be flexible,open and easy for expansion by experiments.
-
-
References
[1]
|
LI Y,TAN L X,ZHANG W K.Open motion control system based on PC and motor control card[J].Instrumentation Technology,2007,14 (4):43-47(in Chinese). |
[2]
|
HONG L,WU G.Technology basis of laser manufacture[M].Beijing:China Communications Press,2007:60-63(in Chinese). |
[3]
|
ZHAO Ch H,QIN X Sh,TANG H.Research on open-CNC system based on PC[J].Mechanical Science and Technolog,2005,24(9):1108-1113(in Chinese). |
[4]
|
SUN B,YANG R Q.The present situation and trend of numerical control system based on PC[J].Machine Tool&Hydraulics,2001,29 (4):3-5(in Chinese). |
[5]
|
InnoLas.Table of contents of spitLight 1200 and 1500 Nd:YAG laser system[M].Munich:InnoLas,2008:67-70. |
[6]
|
Step-servo Co.Ltd..Operation manual of motor control card named MPC08SP[M].Chengdu:Step-servo Co.Ltd.,2002:1-110(in Chinese). |
[7]
|
HILL M R,RANKIN J,HACKEL L,et al.Engineering and economic considerations for life-extension by laser peening[C]//Aging Aircraft Conference.Washington DC,USA:NASA,2002:50-53. |
[8]
|
CHEN J M,BAO Y,XIAO R Sh.Auto-programming system for 3D laser processing[J].Laser Technology,2001,25(3):218-220(in Chinese). |
[9]
|
XI J M,LAO G H.Open-architecture motion control system based on PC[J].Machine Tool&Hydraulics,2008,36(11):91-94(in Chinese). |
[10]
|
CAO X G,ZHOU J Z,YUAN G D.Orthogonal optimum design of laser peen form ing based on finite element simulation[J].Laser Technology,2007,31(6):656-658(in Chinese). |
-
-
Proportional views
-