Advanced Search

ISSN1001-3806 CN51-1125/TN Map

Volume 36 Issue 5
Jul.  2012
Article Contents
Turn off MathJax

Citation:

Elimination of the interference of bias light for laser warning systems

  • Received Date: 2011-12-05
    Accepted Date: 2012-02-13
  • In order to effectively restrain the interference of bias light from the surrounding environment for the spectral nonimaging pulse laser alarm device,after eliminating the bias light noise through light filtering,circuit filtering,comparator's threshold restrictions,aiming at the existence of huge energy background flash interference,according to the difference of the time length between background flash and pulse laser,calculating the incident light time of the alarm device based on complex programmable logic device and doing a judgment,the background flash interference can be eliminated.During the actual test,the false-alarm number of the alarm device caused by sunlight was 0 in 12h,and no false alarm happened in various simulating close and huge energy background flash interference situation.The result shows that the project can provides a good example and experimental scheme for resolving the false alarm problem cause by bias light of a laser warning device,the circuit hardware is highly integrated for judging time with only one complex programmable logic device chip,its program is short,and the method has good application value.
  • 加载中
  • [1]

    ZHAO T,LIU M,WANG L.Device and the development of the laser warning technology[J].Ship Electronic Engineering,2009,29(2):27-29(in Chinese).
    [2]

    DAVIS M A,KERSEY A D.Application of a fiber Fourier transform spectrometer to the detection of wavelength-encoded signals from Bragg grating sensors[J].Journal of Lightwave Technology,1995,1(7):1289-1295.
    [3]

    TUTTLE R.Large aircraft infrared countermeasures system[J].Aerospace Daily&Defense Report,2004,210(7):6-7.
    [4]

    WU X Y,CHEN Y J,ZHANG H D,et al.Large field laser detection and warning technology[J].Opto-Electronic Engineering,2004,31 (7):5-7(in Chinese).
    [5]

    LI Sh W,ZHANG J L,WANG Zh B,et al.Detecting and warning system about laser attacking direction[J].Laser&Optoelectronics Progress,2010(6):1-4(in Chinese).
    [6]

    WANG Zh B,ZHANG J L.Spectrum analysis of pulsed laser and sky light[J].Journal of Test and Measurement Technology,2006,20(1):14-18(in Chinese).
    [7]

    HE W G,WU J,WANG Sh F.Design of laser detection and warning optical system[J].Opto-Electronic Engineering,2006,33(7):48-51 (in Chinese).
    [8]

    LU Y.Status quo,key technology and development of laser warning system[J].Modern Defence Technology,2009,37(3):89-93(in Chinese).
    [9]

    ZHANG J L,WANG M,TIAN E M,et al.Analysis and experimental verification of sensitivity and SNR of laser warning receiver[J].Spectroscopy and Spectral Analysis,2009,29(1):20-23(in Chinese).
  • 加载中
通讯作者: 陈斌, bchen63@163.com
  • 1. 

    沈阳化工大学材料科学与工程学院 沈阳 110142

  1. 本站搜索
  2. 百度学术搜索
  3. 万方数据库搜索
  4. CNKI搜索

Article views(3668) PDF downloads(617) Cited by()

Proportional views

Elimination of the interference of bias light for laser warning systems

  • 1. School of Information and Communication Engineering, North University of China, Taiyuan 030051, China;
  • 2. Opto-Electronic Information and Instrument Engineering Technology Research Center of Shanxi Province, North University of China, Taiyuan 030051, China;
  • 3. Key Laboratory of Instrumentation Science&Dynamic Measurement of Ministry of Education, North University of China, Taiyuan 030051, China

Abstract: In order to effectively restrain the interference of bias light from the surrounding environment for the spectral nonimaging pulse laser alarm device,after eliminating the bias light noise through light filtering,circuit filtering,comparator's threshold restrictions,aiming at the existence of huge energy background flash interference,according to the difference of the time length between background flash and pulse laser,calculating the incident light time of the alarm device based on complex programmable logic device and doing a judgment,the background flash interference can be eliminated.During the actual test,the false-alarm number of the alarm device caused by sunlight was 0 in 12h,and no false alarm happened in various simulating close and huge energy background flash interference situation.The result shows that the project can provides a good example and experimental scheme for resolving the false alarm problem cause by bias light of a laser warning device,the circuit hardware is highly integrated for judging time with only one complex programmable logic device chip,its program is short,and the method has good application value.

Reference (9)

Catalog

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return