Zirconia single crystal fiber generation based on new laser heating pedestal growth
-
1.
National Key Laboratory For Electronic Measurement Technology, North University of China, Taiyuan 030051, China
-
Corresponding author:
WANG Gao, wanggao@nuc.edu.com
;
-
Received Date:
2011-03-07
Accepted Date:
2011-06-03
-
Abstract
WANG Nan-nan,WANG Gao,LI Yang-jun,WANG Xiao-yan,ZHAO Hui(National Key Laboratory For Electronic Measurement Technology,North University of China,Taiyuan 030051,China) In order to produce zirconia crystal optical fibers,a pulling single crystal fiber system was put forward based on the method of laser heating pedestal growth(LHPG).Based on original LHPG,a circular focused laser heating system was designed and its optical system was improved and optimized.Making use of both focal points in an ellipsoidal mirror,a focused circular heating source was formed at one of the focal points to melt the crystal and produce fibers.Optical simulation was carried out with ZEMAX software.The simulation results indicate that a high quality circular heating source can be formed at the focal point of the optical system.The system has incomparable advantages comparing with other laser pedestal heating optical systems.The system has good application in the production of zirconia and other high temperature single-crystal optical fibers.
-
-
References
|
[1]
|
BOULON G,ITO M,GOUTAUDIER C,et al.Advances in growth of fiber crystal by the LHPG technique.Application to the optimization of Yb3+-doped CaF2 laser crystals[J].Journal of Crystal Growth,2006,292(1):230-235. |
|
[2]
|
DENGSH,TAOXY,LIUMP,et al.Thermal analysis of metal ablation by means of femto second-to-nanosecond laser pulses[J].Laser Technology,2007,31 (1):4-7 (in Chinese). |
|
[3]
|
YU Y,NIU Y X,WANG X Sh,et al.Numerical simulation of steadystate thermal blooming about high power laser[J].Laser Technology,2007,31 (2):182-184(in Chinese). |
|
[4]
|
ZHANG Y B,PICKRELL G R,QI B,et al.Single-crystal sapphire based optical polarimetric sensor for high temperature measurement[J].Sensors,2006,6(8):823-834. |
|
[5]
|
STANDIFER E,PARK M,MAXWELL G,et al.Multi-beam opticai after heater for laser heated pedestal growth:US,2009/0020069 A1[P].2009-01-22. |
|
[6]
|
TONG L M.Growth of high-quality Y2O3-ZrO2 single-crystal optical fibers for ultra-high-temperature fiber-optic sensors[J].Journal of Crystal Growth,2000,217(4):281-286. |
|
[7]
|
SHUR J W,LEE H J,YOON D H.Near-stoichiometric LiNbO3:ZrO2 single crystal growth by micro pulling down method[J].Crystal Research and Technology,2010,45 (2):115-118. |
|
[8]
|
GU J G,SHEN Y H,CHEN Sh Y.Molten zone controlling technique of single crystal fiber by means of LHPG[J].Materials Science and Engineering,2001,19 (4):20-23 (in Chinese). |
|
[9]
|
LU Z H,CHEN J Q,CHEN X F,et al.Characteristics of single crystal fiber growth[J].Journal of Synthetic Crystals,1989,18(4):293-297(in Chinese). |
|
[10]
|
LU Z H,CHEN J Q,CHEN X F,et al.Conditions and controls of the growth of single crystal fibers[J].Journal of Synthetic Crystals,1989,18(2):154-159(in Chinese). |
|
[11]
|
SHEN Y H,WANG Y Q,YELH,et al.Study on the laser-heated miniature pedestal growth system with circular laser focusing[J].High Technology Letters,1994,7 (3):16-18 (in Chinese). |
-
-
Proportional views
-
Map
DownLoad: