Research for temperature distribution characteristics of the fiber in a Bragg fiber laser
-
1.
Sichuan Key Laboratory of Computational Physics, School of Physics and Electrical Engineering, Yibin University, Yibin 644000, China;
-
2.
School of Physical Electronics, University of Electronic Science and Technology of China, Chengdu 610054, China
-
Received Date:
2010-10-08
Accepted Date:
2010-12-01
-
Abstract
In order to study the temperature property of the fiber in a Bragg fiber laser, the steady thermal model was presented. The temperature distribution was analyzed based on heat transfer equations. The temperature distribution and the thermally-induced stress in the fiber were simulated by means of numerical finite-element method. Effects of thermal power density, number of cladding layers and environmental convection coefficient on the temperature distribution were discussed. The results show that the temperature of coating is much lower than its critical temperature 300℃, and the temperature difference between the core and coating is only about 10℃. The result of analysis is helpful to the design of Bragg fiber lasers.
-
-
References
|
[1]
|
LI K,WANG Y,ZHAO W,et al.High-power double-clad large-mode area phonic crystal fiber laser[J].SPIE,2005,6028 :60280/1-60280/6. |
|
[2]
|
CHEN Z L,HOU J,JIANG Z F.Theoretical study on thermal effect in Yb-doped double-clad high power fiber laser[J].Leaser Technology，2007，31(5):544-550(in Chinese). |
|
[3]
|
YEH P,YARIV A,MAROM E.Theory of Bragg fiber[J].Journal of the Optical Society of America，1978,68(9):1196-1201. |
|
[4]
|
FVRIER S,GAPONOV D D,ROY P,et al.High-power photonic-bandgap fiber laser [J].Optics Letters,2008,33(9):989-991. |
|
[5]
|
CHENG X,XU J.Thermal and thermal-optical effects in high-power photonic crystal fiber lasers[J].Optical Engineering,2006,45(12):124204/1-124204/5. |
|
[6]
|
LIMPERT J,SCHMIDT O,ROTHHARDT J,et al.High-power rode-type photonic crystal fiber laser[J].Optics Express,2005,13(4):1055-1058. |
|
[7]
|
SU H,LI Y,LU K,et al.Wavelength tunable Yb3+-doped double-clad photonic crystal fiber laser[J].SPIE,2007,6823:682318/1-682318/7. |
|
[8]
|
ORTA B,LECAPLAIN C,HIDEUR A,et al.High-power femtosecond Yb-doped single-polarization photonic crystal fiber laser[J].SPIE,2008,6873:687321/1-687321/6. |
|
[9]
|
BOULLET J,ZAOUTER Y,DESMARCHELIER R,et al.94W ytterbium-doped single-mode rode-type photonic crystal fiber laser operating at 977nm[J].SPIE,2008,7195:719504/1-719504/10. |
|
[10]
|
YANG H J,HU Y,LIU J X,et al.Research for light propagation chracteristics of Bragg fiber [J].Journal of Opoelectronics·Laser，2008，18(12):1410-1413(in Chinese). |
|
[11]
|
CHEN H T,YANG H J,LIU P Sh,et al.Optimum design of low-loss hollow OmniGuide fibers[J].Optik,2010,121(23):2113-2116. |
|
[12]
|
ZHU H T,LOU H Q,ZHOU J,et al.Experimental and theoretical study on designing of cooling device for the kilowatt-level double cladding fiber laser [J].Acta Physica Sinica,2008,57(8):4966-4971(in Chinese). |
-
-
Proportional views
-
Map
DownLoad: