Research of partial penetrated laser overlap-welding of thin steel sheet
-
1.
State Key Laboratory of Advanced Design and Manufacturing for Body, Hunan University, Changsha 410082, China;
-
2.
Laser Research Institute, Hunan University, Changsha 410082, China
-
Received Date:
2011-03-23
Accepted Date:
2011-03-29
-
Abstract
In order to study the welding quality of partial penetrated laser overlap-welding of thin steel sheet, SUS304 austenitic stainless steel and SPCC cold-rolled steel sheet were welded with fiber laser and CO2 laser. And the main factors affecting the partial penetrated laser welding were analyzed. The micro-structure and the mechanical properties of the weld were measured, finally, the effects of main welding parameters, including laser power, welding speed, defocus distance, pulse frequency and duty ratio, on weld surface quality and performance were obtained. The results show that under the proper welding condition, the weld topography is uniform and continuous, the strength of weld is 50% higher than that of base metal, and its micro-hardness of fusion zone is higher than that of base metal.
-
-
References
|
[1]
|
WANG H X,WANG Ch Sh,SHI Ch Y,et al.The investigation of partial penetration lap laser welding applied on stainless steel railway vehicles [J].Manufacturing Science and Engineering,2010,97(101):3832-3835(in Chinese). |
|
[2]
|
QIN G L,LIN Sh Y.Laser welding volume energy and its influence on weld penetration in laser deep penetration welding[J].Transactions of the China Welding Institution,2006,27(7):74-76(in Chinese). |
|
[3]
|
ZHENG Q G,GU J N,WANG T,et al.Investigation on melting pool behavior and defects of laser welding[J].Laser Technology,2000,24(2):90-94(in Chinese). |
|
[4]
|
BENYOUNIS K Y,OLABI A G,HASHMI M S J.Multi-response optimization of CO2 laser-welding process of austenitic stainless steel[J].Optics & Laser Technology,2008,40(1):76-87. |
|
[5]
|
HU X H,XIONG J A,HU L N,et al.The influences of laser beam mode and thermal lens effect on laser welding of tin-plat[J].Applied Laser,1998,18(1):38-40(in Chinese). |
|
[6]
|
ZHANG X H,ZHANG X D,CHEN W Zh,et al.Prevention and mechanical analysis of porosity formation in pulsed CO2 laser welding of 30CrMnSiA[J].Laser Technology,2007,31(4):419-422(in Chinese). |
|
[7]
|
GAO M,ZENG X Y,HU Q W.CO2 laser-pulsed MAG hybrid welding of mild steel[J].Laser Technology,2006,30(5):498-506(in Chinese). |
|
[8]
|
LI H M,SUN D Q,WANG W Q,et al.Study on organization and mechanical properties of laser welding of austenitic stainless steel wire[J].Transactions of the China Welding Institution,2009,30(6):71-74(in Chinese). |
|
[9]
|
YAN J,ZENG X Y,GAO M,et al.Technics research of hybrid laser-TIG welding of 316L stainless steel[J].Laser Technology,2007,31(5):489-492(in Chinese). |
|
[10]
|
CHEN Y H,KE L M,XU Sh L,et al.Study on the micro laser welding parameter of ultrathin stainless steel sheet[J].Journal of Materials Engineering,2008(11):28-31(in Chinese). |
-
-
Proportional views
-
Map
DownLoad: