Study on direct mapping calibration method of an electronic target based on non-diffracting beam
-
1.
Department of Instrumentation Science and Technology, School of Mechanical Science and Engineering, Huazhong University of Science & Technology, Wuhan 430074, China
-
Corresponding author:
ZHAO Bin, zhaobin63@yahoo.cn
;
-
Received Date:
2010-09-29
Accepted Date:
2010-11-18
-
Abstract
Based on the principle of the non-diffracting beam, a new electronic target was designed for guidance of a shield machine. The system constitution and the measurement principle of attitude angles of the electronic target were discussed. Since the accurate optic center of optic system in the electronic target was difficult to find, a new calibration method was proposed. The spot center location of the incident laser of the total station in CCD fixed in the electronic target and the angle data of the total station were combined, and a mapping database was set up. During guidance of the shield machine, the actual slope angle, rolling angle and horizontal azimuth angle of the electronic target and the center of the head of shield machine were computed by the space angle of the incident laser interpolated by the actual spot center location and the angles of electronic gradienter. The experiment shows that high calibration precision is achieved by the calibration method, and high measurement precision is gained during measurement of electronic target.
-
-
References
|
[1]
|
FENG D J,PAN Q L,ZHANG F M,et al.On the orientation survey of the shield in subway construction[J].Geotechnical Investigation and Surveying,2003,31(5):57-61(in Chinese). |
|
[2]
|
ZHANG H M,GU L.On the measurement and the method of computation of the posture parameters of shields[J].Modern Tunnelling Technology,2004,41(2):14-20(in Chinese). |
|
[3]
|
ZOU W J,ZHU G L,WU X B.Angle measuring system of laser based on array CCD[J].Opto-Electronic Engineering,2006,33(10):91-95(in Chinese). |
|
[4]
|
WU X B,ZHU G L,ZOU W J.Research of a PSD-based electric laser system[J].Machinery & Electronics,2006,24(7):38-40(in Chinese). |
|
[5]
|
PAN M H,ZHU G L.Study of measure methods of the automatic guiding system of shield machine [J].Construction Technology,2005,34(6):34-36(in Chinese). |
|
[6]
|
LIU D L,HUANG Y K.Guided system VMT of shield machine[J].Construction Machinery，2003,23(1):60-61(in Chinese). |
|
[7]
|
ZHOU L P,ZHAO B,LI Zh.Theory and generation of non-diffracting Bessel beams[J].Optics and Precision Engineering,1997,5(4):14-19(in Chinese). |
|
[8]
|
ZHANG B,L B D.Analyzing the propergation properties of diffraction-free beams[J].Laser Technology,1996,20(1):14-19(in Chinese). |
|
[9]
|
ZHAI Zh Sh,ZHAO B.Study on property of central spot of non-diffracting beams[J].Laser Technology,2008,32(5):480-483(in Chinese). |
|
[10]
|
ZHAO B,LI Zh.The focus diffraction property of axicon illuminated by inclined plane wave[J].Acta Optica Sinica,1999,19(3):299-305(in Chinese). |
|
[11]
|
CHEN H,ZHAO B.Global center detection algorithm of non-diffracting beam[J].Semiconductor Optoelectronics,2008,29(5):770-773(in Chinese). |
|
[12]
|
ZHU G L,WU X B,PAN M H.Analysis of errors in shield automatic guide system[J].China Municipal Engineering,2006,31(1):44-47(in Chinese). |
-
-
Proportional views
-
Map
DownLoad: