Advanced Search

ISSN1001-3806 CN51-1125/TN Map

Volume 35 Issue 3
May  2013
Article Contents
Turn off MathJax

Citation:

A simple online large-spot laser power/energy measurement device

  • Received Date: 2010-07-02
    Accepted Date: 2012-07-30
  • In order to eliminate effect of inhomogeneous light spot, light intensity randomness, beam off-axis in the process of online large-spot laser energy measurement,a simple method was introduced. The laser beam was collected with a common diffusive plate and its spot was decreased so that its spatial information was eliminated and only the intensity information was reserved. At the same time, the sampling spots were laid in the region diffusive light could reach so as to eliminate effect of transmission section and polarization state. Furthermore, the distance between sampling spots and the diffusive plate was much greater than beam size to eliminate the effect of insufficiency of the sensor receiving angle. Laser energy was obtained by a photoelectric integrator. Experiment results indicate that the response in the laser detection surface is coincident and partial intensity change and laser divergence have little effect on the measurement result. The above suggested method can eliminate effect of many factors and ensure the measurement accuracy.
  • 加载中
  • [1]

    SU Y,WAN M.High energy laser system[M].Beijing:National Defense Industry Press,2004:435-436(in Chinese).
    [2]

    WEI J F,GUAN Y G,ZHOU Sh,et al.Research on online calibration methods for high energy laser energy measurement device[J].Chinese Journal of Lasers,2009,36(8):2012-2016(in Chinese).
    [3]

    WEI J F,GUAN Y G,ZHOU Sh,et al.Research on effect to online energy measurement device for long-pulse laser by laser pulse width[J].Chinese Journal of Lasers,2010,37(4):1212-1216(in Chinese).
    [4]

    LIU H,XU L B,PENG Zh T,et al.Temporal multiplexing for measurement of temporal profile on SG-Ⅲ prototype laser facility[J].Laser Technology,2010,34(2):157-160(in Chinese).
    [5]

    GAO X Y,ZHOU D H,ZHOU Sh,et al.Transformation theory of light power waveform by an integrating sphere[J].Acta Sinica Optica,2002,22(4):465-469(in Chinese).
    [6]

    CHEN H Y,ZHANG L M,YANG B Y,et al.Diffuser reflection method for measuring power/energy of far-field laser spot[J].High Power Laser and Particle Beams,2009,21(10):1441-1445(in Chinese).
    [7]

    BORN M,WOLF E.Principle optics[M].Beijing:Publishing House of Electronics Industry,2005:35-37(in Chinese).
    [8]

    PANG M,YUAN X W,GAO X Y,et al.Spot distortion calibration in measurement of laser intensity distribution based on imaging by scattering[J].Acta Sinica Optica,2010,30(2):451-455(in Chinese).
    [9]

    ZHANG G Y,WANG Ch,YUAN H T,et al.Monte-Carlo simulation on the performance of light power waveform transformation by the integrating sphere[J].Laser Journal,2007,28(2):26-28(in Chinese).
    [10]

    WEI J F,ZHANG K,ZHOU Sh,et al.Research on calibration of high-energy-laser calorimeter[J].High Power Laser and Particle Beams,2008,20(11):1798-1802(in Chinese).
  • 加载中
通讯作者: 陈斌, bchen63@163.com
  • 1. 

    沈阳化工大学材料科学与工程学院 沈阳 110142

  1. 本站搜索
  2. 百度学术搜索
  3. 万方数据库搜索
  4. CNKI搜索

Article views(3793) PDF downloads(168) Cited by()

Proportional views

A simple online large-spot laser power/energy measurement device

  • 1. Institute of Applied Electronnics, China Academy of Engineering Physics, Mianyang 621900, China

Abstract: In order to eliminate effect of inhomogeneous light spot, light intensity randomness, beam off-axis in the process of online large-spot laser energy measurement,a simple method was introduced. The laser beam was collected with a common diffusive plate and its spot was decreased so that its spatial information was eliminated and only the intensity information was reserved. At the same time, the sampling spots were laid in the region diffusive light could reach so as to eliminate effect of transmission section and polarization state. Furthermore, the distance between sampling spots and the diffusive plate was much greater than beam size to eliminate the effect of insufficiency of the sensor receiving angle. Laser energy was obtained by a photoelectric integrator. Experiment results indicate that the response in the laser detection surface is coincident and partial intensity change and laser divergence have little effect on the measurement result. The above suggested method can eliminate effect of many factors and ensure the measurement accuracy.

Reference (10)

Catalog

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return