Thermal stress simulation of laser induced damage of fused silica by contamination on the surface
-
Corresponding author:
YUAN Xiao-dong, yxd66my@163.com
;
-
Received Date:
2010-04-09
Accepted Date:
2010-05-19
-
Abstract
In order to study the laser-induced damage mechanism in inertial confinement fusion system,temperature and thermal stress distributions in the fused silica,heated by repetition frequency laser,were given by means of finite element methods.The simulated results indicate the temperature of the contaminations rise to 2800K during the pulse laser irradiation, but the fused silica's temperature mainly rise from 300K to 2200K in 100μs after irradiation,and damage induced by the thermal stress occurs.The strong compressive in the damage region is about 30.73MPa.The highest stress outside the damage region is deviatoric hoop stress.The damage morphologies were tested by means of optical microscopy.The simulated outcomes correspond to the experiment result.
-
-
References
|
[1]
|
GENIN F Y,RUBENCHICK A M,BURNHAM A K,et al.Thin film contamination effects on laser-induced damage of fused silica surface at 355nm[J].Proceedings of SPIE,1999,3492:212-218. |
|
[2]
|
MIAO X X,YUAN X D,WANG H J,et al.Experiment of laser induced damage threshold for fused silica initiated at thin film contamination of Cu on surface[J].High Power Laser and Particle Beams,2008.20(9):1483-1486(in Chinese). |
|
[3]
|
GENIN F Y.MICHLITSCH K,FURR L,et al.Laser-induced damage of fused silica at 355 and 1064nm initiated al aluminum contamination particles on the surface[J].Proceedings of SPIE,1996,2966:126-138. |
|
[4]
|
GENIN F Y,KOZLOWSKI M R,BRUSASCO R.Catastrophic failure of contaminated fused silica optics at 355nm[J].Proceedings of SPIE,1997,3047:978-986. |
|
[5]
|
FEIT M D,KOZLOWSKI M R,GENIN F Y,et al.Rear-surface laser damage on 355nm silica optics owing to fresnel diffraction on fuont-surface contamination particles[J].Applied Optics,2000,39(21):3654-3663. |
|
[6]
|
FEIT M D,RUBENCHICK A M,FAUX D R.et al.Modeling of laser damage initiated by surface contamination[J].Proceedings of SPIE,1996,2966:417-424. |
|
[7]
|
SUN Ch W,LU Q Sh,FAN Zh X,et al.falser irradiation effect[M].Beijing:National Defence Industry Press,2002:280-286(in Chinese). |
|
[8]
|
ZHANG J,WEI X F,ZHANG X J.et al.Influence factors of temperature and strain distribution in electro-optic crystal for repetition frequency lasers[J].Laser Technology,2009,33(1):27-31(in Chinese). |
|
[9]
|
CAO D X.Smdy on thermal effects and thermal management in high power solid laser[D].Changsha:National University of Defense Technology,2008:37-53(in Chinese). |
|
[10]
|
CHENG F,MENG Sh X.Damage mechanisms of optical martial[J].Physics Progress,1998,18(2):187-206(in Chinese). |
|
[11]
|
FEIT M D,RUBENCHICK A M,BOLEY C D.et al.Development of a process model for CO2 laser mitigation of damage growth in fused silica[J].Proeeeddings of SPIE,2004,5273:145-154. |
-
-
Proportional views
-
Map
DownLoad: