Advanced Search

ISSN1001-3806 CN51-1125/TN Map

Volume 35 Issue 1
Jan.  2016
Article Contents
Turn off MathJax

Citation:

Study on high-speed all-optical clock extraction using an amplified feedback laser

  • In order to investigate the performance of all-optical clock extraction using an amplified feedback laser, the method of single sideband phase noise intensity integration was adopted. The clock extraction from not-degraded and noise-degraded 40Gbit/s signals was experimentally demonstrated and timing jitter of the extracted clock was calculated. Besides, the locking range of amplified feedback laser was measured. As a result, the clock extracted from the not-degraded and noise-degraded signal with timing jitter of 130fs and 150fs were obtained respectively. The measured locking range of amplified feedback laser was 234MHz. The experimental results show that the amplified feedback laser-based all-optical clock extraction has a high tolerance to the noise degradation and a wide locking range. The results are important for the further development of all-optical clock extraction technology.
  • 加载中
  • [1]

    HUO L,YANG Y F,NAN Y B,et al.A study on the wavelength conversion and all-optical 3R regeneration using cross-absorption modulation in a bulk electroabsorption modulator[J].Journal of Ligtwave Technology,2006,24(8):3035-3044.
    [2]

    TSUCHIDA H,SUZUKI M.40Gbits optical clock recovery using an injection-locked optoelectronic oscillator[J].IEEE Photonics Technology Letters,2005,17(1):211-213.
    [3]

    OHARA T,TAKARA H,SHAKE I,et al.Highly stable 160Gbit/s OTDM technologies based on integrated MUX/DEMUX and drift-free PLL-type clock recovery[J].IEEE Journal of Selected Topics in Quantum Electronics,2007,13(1):40-48.
    [4]

    WANG T,LOU C Y,HUO L,et al.Combination of comb-like filter and SOA for preprocessing to reduce the pattern effect in the clock recovery[J].IEEE Photonics Technology Letters,2004,16(2):614-616.
    [5]

    CONTESTABILE G,D'ERRICO A,PRESI M,et al.40GHz all-optical clock extraction using a semiconductor-assisted Fabry-Perot filter[J].IEEE Photonics Technology Letters,2004,16(21):2523-2525.
    [6]

    BORNHOLDT C,SARTORIUS B,SCHELBASE S,et al.Self-pulsating DFB laser for all-optical clock recovery at 40Gbit/s[J].Electronics Letters,2000,36(4):327-328.
    [7]

    ZHOU Zh Q,TANG Y L,XIE Ch J.Optimum schemes of dispersion compensation transmission systems using dispersion compensation fibers[J].Laser Technology,2000,24(5):265-269(in Chinese).
    [8]

    AKBULUT M,WEINER A M,MILLER P J.Broadband all-order polarization mode dispersion compensation using liquid-crystal modulator arrays[J].Journal of Lightwave Technology,2006,24(1):251-261.
    [9]

    SUN Y,PAN J Q,ZHAO L J,et al.All optical clock recovery for 40Gbs using an amplified feedback DFB laser[C] // Communications and Photonics Conference and Exhibition.Shanghai: Asia Communications and Photonics Conference and Exhibition,2009:1-2.
    [10]

    ZHOU H B,LOU C Y,PAN Sh L,et al.Ultra-short optical pulse source based on phase and intensity hybrid modulation[J].Journal of Tsinghua University,2007,48(4):538-540(in Chinese).
  • 加载中
通讯作者: 陈斌, bchen63@163.com
  • 1. 

    沈阳化工大学材料科学与工程学院 沈阳 110142

  1. 本站搜索
  2. 百度学术搜索
  3. 万方数据库搜索
  4. CNKI搜索

Article views(4047) PDF downloads(489) Cited by()

Proportional views

Study on high-speed all-optical clock extraction using an amplified feedback laser

    Corresponding author: LOU Cai-yun, loucy_ee@mail.tsinghua.edu.cn
  • 1. State Key Laboratory of Integrated Optoelectronics, Department of Electronics Engineering, Tsinghua University, Beijing 100084, China;
  • 2. Key Laboratory of Semiconductor Materials Science, Institute of Semiconductors, Chinese Academy of Science, Beijing 100083, China

Abstract: In order to investigate the performance of all-optical clock extraction using an amplified feedback laser, the method of single sideband phase noise intensity integration was adopted. The clock extraction from not-degraded and noise-degraded 40Gbit/s signals was experimentally demonstrated and timing jitter of the extracted clock was calculated. Besides, the locking range of amplified feedback laser was measured. As a result, the clock extracted from the not-degraded and noise-degraded signal with timing jitter of 130fs and 150fs were obtained respectively. The measured locking range of amplified feedback laser was 234MHz. The experimental results show that the amplified feedback laser-based all-optical clock extraction has a high tolerance to the noise degradation and a wide locking range. The results are important for the further development of all-optical clock extraction technology.

Reference (10)

Catalog

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return