Effect of blue-violet light on quality of cladding surfaces
-
Corresponding author:
HONG Lei, jnhonglei@yahoo.Com
-
Received Date:
2009-12-18
Accepted Date:
2009-12-29
-
Abstract
In order to reveal the relationship between blue-violet light signal and the surface quality in cladding process,the blue-violet light signal intensity was measured in real time with a UV-420 device.The blue-violet intensity was obtained at different scanning speeds and laser power.Experimental and analytical results show that the surface quality is good when blue-violet intensity is relatively stabled at 1.7μW/cm2～2.5μW/cm.And the plasma is mainly caused by the breakdown of powder's vaporization.The blue-violet intensity can reflect the surface quality,and it can also provide parameters for closed-loop feedback control.
-
-
References
|
[1]
|
HONG L,WU G.Laser basic manufacturing technology[M].Beijing:China Communications Press,2007:259-300(in Chinese). |
|
[2]
|
ZHANG G Sh.Modern laser manufacturing technology[M].Beijing:Chemical Industry Press,2006:135-212(in Chinese). |
|
[3]
|
LIU X B,WANG H M.The influence of processing parameters on laser cladding composite coatings on TiAl intermetallic alloy[J].Laser Technology,2006,30(1):67-69(in Chinese). |
|
[4]
|
BI G J,ANDRES G,KONRAD W,et al.Identification and qualification of temperature signal for monitoring and control in laser cladding[J].Optics and Lasers in Engineering,2006,44(12):1348-1359. |
|
[5]
|
YU D,ZHONG M L,LIU W J,et al.Real-time monitoring research of melt pool images in laser cladding process[J].Chinese Journal of Lasers,2007,34(sl):86-90(in Chinese). |
|
[6]
|
CHEN J,TAN H,YANG H O,et al.Research on the molten pool behavior in the process of laser rapid forming through in situ observation technique[J].Applied Laser,2005,25(2):77-80(in Chinese). |
|
[7]
|
WANG Ch M.Multi-sensor real-time quality diagnosis and its theoretical basis for laser welding[D].Wuhan:Huazhong University of Science and Technology,2005:128-133(in Chinese). |
|
[8]
|
LIU J H,ZHU Sh G.Image processing on high-speed photography of CO2 laser welding plasma[J].Applied Laser,2002,22(6):342-344(in Chinese). |
|
[9]
|
MUKHERJEE S,CHAKRABORTY S,MANNA L.Effect of process parameters on laser surface hardening of plain carbon eutectoid steel[J].Computers Materials Continua,2009,10(3):217-228. |
|
[10]
|
ARIF A.Effect of input variability on the quality of laser shock processing[J].Journal of Mechanical Science and Technology,2009,23(10):2603-2611. |
-
-
Proportional views
-
Map
DownLoad: