Effect of laser incident angles on welding performance of galvanized sheet for vehicle body
-
1.
State Key Laboratory of Advanced Design and Manufacturing for Body, Hunan University, Changsha 410082, China;
-
2.
Laser Research Institute, Hunan University, Changsha 410082, China
-
Received Date:
2010-01-06
Accepted Date:
2010-02-19
-
Abstract
In order to study effect of laser incident angles on welding performance of galvanized sheet,firstly orthogonal test was adopted to obtain ideal welding parameters at normal incidence through analyzing the weld topography,tension and shear load.Then galvanized sheet welding tests at different incident angles were carried out under the same ideal parameters at vertical incidence.The transverse weld topography,the connect width between plates and tension and shear load were analyzed when the incident angle changed.The research results show that fine weld topography and greater tension and shear load can be obtained at incident angle less than 30°;the connect width between plates has an significant influence on tension and shear load;slight change of the gap between plates will bring large effect on the critical incident angle.
-
-
References
|
[1]
|
CUI H Y,ZUO T Ch.CO2 laser welding of zinc coated steel sheets[J].Transactions of the China Welding Institution,2004,25 (5):67-74(in Chinese). |
|
[2]
|
HUANG Z J,HU L J,LIU J H,et al.Research on zinc distribution and corrision resistance of laser welding joint of galvanized steel[J].Welding Joining,2004(5):17-20(in Chinese). |
|
[3]
|
WU Q,XU L Y,CHEN G Y,et al.Corrosion property of the laser welded joint of high-strength galvanized sheet[J].Laser Technology,2008,32(3):334-336(in Chinese). |
|
[4]
|
WANG J Ch.Development and expectation of laser welding technology[J].Laser Technology,2001,25(1):48-53(in Chinese). |
|
[5]
|
LIU J Ch,LI L J,ZHU X D,et al.Discussion on laser welding combined with other heat resources[J].Laser Technology,2003,27(5):486-489(in Chinese). |
|
[6]
|
SUI B,DU D,CHANG B H,et al.Visual information model for assembly process of body-in-white[J].Transactions of the China Welding Institution,2003,24(5):25-28(in Chinese). |
|
[7]
|
HAN L J.Laser welding applied on MAGOTAN vehicle body manufacture of FAW-VOLKSWAGEN[J].Technology Highlights,2008(8):32-40(in Chinese). |
|
[8]
|
LI L J.Modern laser process equipment[M].Beijing:Beijing Institute of Technology Press,1993:23-24(in Chinese). |
|
[9]
|
XIONG J G,HU L J,LIU J H,et al.Study on laser welding of zinc coated steel and the effects of zinc vaporization[J].Laser Technology,1998,22(1):26-29(in Chinese). |
|
[10]
|
XI Sh Y.Robust analysis and experiment of laser welding process parameters on overlap joint[J].Applied Laser,2008,28(4):297-300(in Chinese). |
-
-
Proportional views
-
Map
DownLoad: