Advanced Search

ISSN1001-3806 CN51-1125/TN Map

Volume 34 Issue 4
Mar.  2011
Article Contents
Turn off MathJax

Citation:

Point measurement of absorptivity of 30CrMnSiA steel at different temperature in atmosphere

  • Received Date: 2009-04-10
    Accepted Date: 2009-05-05
  • Based on integrating sphere absolute method,temperature-dependent absorptivity of 30CrMnSiA carbon steel was measured with heating laser beam(λ=1064nm) and probing laser beam (λ=1319nm) irradiating on material surface in atmosphere environment at the same time.With the probing laser incident at zero and thirty degrees,the absorptivity of the steel was measured at the temperature range from the room temperature to melting point.It was 0.4 at room temperature and 0.9 at melting point.The results show that temperature has important effect on the absorptivity of 30CrMnSiA carbon steel in atmosphere environment,however the incidence angle hasn't any effect on absorptivity.
  • 加载中
  • [1]

    RAMANATHAN S,MODEST M F.Measurement of temperatures and absorptances for laser processing application[J].Proc SPIE,1993,2306:30-40.
    [2]

    SUN C W,LU Q Sh,FAN Zh X,et al.The effect of laser radiation[M].Beijing:National Defence Industry Press,2002:65-68(in Chinese).
    [3]

    BARTL J,BARANEK M.Emissivity of aluminium and its importance for radiometric measurement[J].Measurement Science Review,2004,4(3):31-36.
    [4]

    MCKAY J A,RAYNE J A.Temperature dependence of the infrared absorptivity of the noble metals[J].Phys Rev,1976,B13(2):673-685.
    [5]

    FRIEDRICH D,SHEN J L.Energy coupling efficiency in laser surface treatment[J].The Iron and Steel Institute of Japan,1993,33(9):925-933.
    [6]

    HU Z R,ZHOU J Zh,GUO H F,et al.Simulation of temperature field of laser welding by ABAQUS[J].Laser Technology,2007,31(3):326-329(in Chinese).
    [7]

    YANG Y L,SUN F J,ZHANG D.Laser nitridation technics and the mathematical simulation of laser temperature field on the surface of Ti in atmospheric ambient[J].Laser Technology,2005,29(2):201-204(in Chinese).
    [8]

    WANG G B,LUO F,LIU C L.Reflectance change of 45# steel irradiated by laser in atmosphere[J].Laser and Particle Beams,2006,18(2):181-183(in Chinese).
    [9]

    LIN X Ch,SHAO T M.Lumped method for the measurement of laser absorptance of materials[J].Acta Physics Sinica,2001,50(5):856-859(in Chinese).
    [10]

    ZHANG K X,LIU C L,ZHANG N,et al.Investigation to thermal coupling effect of LF 6M aluminium alloy irradiated by CW/COIL[J].Laser and Particle Beams,1994,6(4):181-183(in Chinese).
    [11]

    WAUTELET M.Laser-assisted reaction of metals with oxygen[J].Appl Phys,1990,A50(2):131-139.
    [12]

    PEREIRA A,DELAPORTE,SENTIS P M,et al.Laser treatment of a steel surface in ambient air[J].Thin Solid Films,2004,453/454:16-21.
    [13]

    ANTONOV V,IORDANOVA I,GURKOVSKY S.Investigation of surface oxidation of low sheet steel during its treatment with Nd∶ glass pulsed laser[J].Surface and Coatings Technology,2002,160(1):44-53.
    [14]

    WANG J T,WENG Ch I,CHANG J H.The influence of temperature and surface conditions on surface absorptivity in laser surface treatment[J].J A P,2000,87(7):3245-3253.
  • 加载中
通讯作者: 陈斌, bchen63@163.com
  • 1. 

    沈阳化工大学材料科学与工程学院 沈阳 110142

  1. 本站搜索
  2. 百度学术搜索
  3. 万方数据库搜索
  4. CNKI搜索

Article views(4414) PDF downloads(258) Cited by()

Proportional views

Point measurement of absorptivity of 30CrMnSiA steel at different temperature in atmosphere

  • 1. Institute of Fluid Physics, China Academy of Engineering Physics, Mianyang 621900, China

Abstract: Based on integrating sphere absolute method,temperature-dependent absorptivity of 30CrMnSiA carbon steel was measured with heating laser beam(λ=1064nm) and probing laser beam (λ=1319nm) irradiating on material surface in atmosphere environment at the same time.With the probing laser incident at zero and thirty degrees,the absorptivity of the steel was measured at the temperature range from the room temperature to melting point.It was 0.4 at room temperature and 0.9 at melting point.The results show that temperature has important effect on the absorptivity of 30CrMnSiA carbon steel in atmosphere environment,however the incidence angle hasn't any effect on absorptivity.

Reference (14)

Catalog

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return