Study on process of laser spot welding for ultra-thin copper
-
1.
School of Mechanical & Automotive Engineering, South China University of Technology, Guangzhou 510640, China
-
Corresponding author:
YANG Yong-qiang, meyqyang@scut.edu.cn
;
-
Received Date:
2009-07-01
Accepted Date:
2009-08-24
-
Abstract
In order to weld ultra-thin T2 copper with high reflectivity by means of Nd:YAG laser at 1.064μm,based on orthogonal test method,effects of pulse peak current,its duration and frequency on maximum shear stress were studied under the conditions of nitrogen protection,+2mm defocusing amount and 1.5mm/s welding speed.The relationships between maximum shear stress and pulse peak current,its duration and frequency were obtained in the experiments; the welding surface and its microstructure were observed.The results show that the ultra-thin copper with high reflectivity can be well spot-welded by means of Nd:YAG laser at 1.064μm,based on design of processing parameters such as the laser pulse shape.
-
-
References
[1]
|
YANG Zh J,GAO H,HAO Q B.Modeling and simulation of laser welding for ultra-thin copper sheet[J].Journal of System Simulation,2008,20(19):5254-5257(in Chinese). |
[2]
|
WANG B W,WANG T,WANG Zh T.Copper alloy and its processing technology[M].Beijing:Chemical Industry Press,2007:1-2(in Chinese). |
[3]
|
HAO Q B.Study on the welding of shin copper plate with YAG laser[D].Changchun:Jilin University,2007:2-3(in Chinese). |
[4]
|
GUO Zh D.Cupro braze radiator rise again[J].Cars and Parts,2002(14):34(in Chinese). |
[5]
|
ZHAO L,CHEN W Zh,ZHANG X D.Microstructure and mechanical properties of laser welded joint of NULCB steel[J].Laser Technology,2006,30(4):344-347(in Chinese). |
[6]
|
NIU Z Q,PENG W D,NIU H B.Design of YAG laser welders controlled with pulse wave shaping and laser power feedback[J].Laser Technology,2008,32(4):406-409(in Chinese). |
[7]
|
ZHANG J,SHAN J G,LEI X,et al.Effects of pulsing parameters on weld shape parameters during pulsed Nd∶ YAG laser welding of aluminum alloys[J].Welding Institution,2008,29(3):21-24(in Chinese). |
[8]
|
GUANG Zh Zh.Laser processing process manual[M].Beijing:China Metrology Press,2007:55-57(in Chinese). |
[9]
|
JIN G Y.Laser processing[M].Beijing:China Machine Press,2005:12-13(in Chinese). |
[10]
|
CHEN Y B.Modern laser welding technology[M].Beijing:Science and Technology Press,2005:71-72(in Chinese). |
[11]
|
WANG J L,ZHOU Ch L,TAN Zh Y.Analysis of the impulse laser welding technology in vacuum environment[J].Applied Science and Technology,2004,31(5):4-6(in Chinese). |
[12]
|
CHEN J M,XU X Y,XIAO R Sh.Laser modern manufacturing technology[M].Beijing:Defense Industry Press,2007:85-86(in Chinese). |
-
-
Proportional views
-