AZ91 magnesium alloy welding based on YAG pulsed laser
-
1.
College of Materials Science and Engineering, Huazhong University of Science and Technology, Wuhan 430074, China
-
Received Date:
2009-08-26
Accepted Date:
2009-09-07
-
Abstract
In order to study the weldability of magnesium alloy AZ91,1.5mm thick AZ91 magnesium alloy was welded with YAG pulsed laser through the art and craft of one side welding with back formation.Analysis showed that the organization of the joint were mainly fine equiaxed grains,with clear fusion line,no significant heat-affected zone and fewer defects.The grain size of the joints was significantly smaller than the base material's.And because of a large number of Mg evaporation which eventually leads to a corresponding increase of Al and Zn in the welding zone,the micro-hardness of the joint was higher than that of the base material.The results show that AZ91 magnesium alloy has good weldability for YAG pulsed laser based on reasonable technological measures.
-
-
References
|
[1]
|
XU R J,ZHANG Y K,CHEN J F.Microstructure change of AZ91 magnesium alloy surface melted by laser[J].Laser Technology,2008,32(5):487-489(in Chinese). |
|
[2]
|
AGHION E,BRONFIN B,ELIEZER D.The role of the magnesium industry in protecting the environment[J].Journal of Materials Processing Technology,2001,117(3):381-385. |
|
[3]
|
DRAUGELATES U,BOUAIFI B,STEINBORN S,et al.Simulation of laser beam welding of magnesium alloys[J].Magnesium Science and Technology,1998,4(12):309-314. |
|
[4]
|
HUANG Zh H,GUO X F,ZHANG Zh M.Study on microstructures of rapidly solidified AZ91D magnesium alloy[J].Transactions of Materids and Heat Treatment,2005,26(1):32-35(in Chinese). |
|
[5]
|
ASAHINA T,KOTOH K,TOKISUE H.Fatigue strength of friction welding joints of AZ31 magnesium alloy[J].International Journal of Fatigue,1995,17(5):376-376. |
|
[6]
|
FENG J C,WANG Y R,ZHANG Zh D.Status and expectation of research on welding of magnesium alloy[J].The Chinese Journal of Nonferrous Metals,2005,15(2):165-176(in Chinese). |
|
[7]
|
GUAN Zh Zh.The working manual of laser processing[M].Beijing:China Metrology Publishing House,1998:55-71(in Chinese). |
|
[8]
|
GAO Q.A complete of latest nonferrous metal phase diagram graph[M].Beijing:Metallurgical Industry Press,2005:971-997(in Chinese). |
|
[9]
|
WANG J F,LIU L M,SONG G.Microstructure character of YAG laser welding AZ31B Mg alloy[J].Transactions of The China Welding Institution,2004,25(3):15-18(in Chinese). |
|
[10]
|
DU H B,HU L J,HU X Y.Technology of laser filler wire welding[J].Aeronautical Manufacturing Technology,2002(11):60-63(in Chinese). |
-
-
Proportional views
-
Map
DownLoad: