Impact of inter-layer scan strategy on quality of direct fabrication metal parts in SLM process
-
1.
School of Mechanical and Automobile Engineering, South China University of Technology, Guangzhou 510640, China
-
Corresponding author:
YANG Yong-qiang, meyqyang@scut.edu.cn
;
-
Received Date:
2009-07-13
Accepted Date:
2009-07-28
-
Abstract
In order to manufacture high density parts with high quality surface by means of selective laser melting technique,orthogonal test method was applied to investigate fiber laser selective laser melting of 316L stainless steel powder.Defects among scan lines and protuberance of outside frame of samples were found in the experiments,which were great impediments for part quality improvement.Then,"inter-layer stagger" scan strategy was applied for its better wetting ability and fabrication efficiency.Bonding quality among scan lines and layers was analyzed by means of micro-observing and fewer holes were found and better metallurgical bonding and higher density were achieved.Finally,optimized process parameters and "interlayer stagger" scan strategy were applied to manufacture customized orthopedics model,its micro-hardness and relative density were HV0.3 250 and 95.8% respectively.Results show that inter-layer scan strategy has fine effect on the quality of direct fabrication metal parts in selective laser melting process.
-
-
References
[1]
|
SANTOS E C,SHIOMI M,OSAKADA K,et al.Rapid manufacturing of metal components by laser forming[J].Machine Tools & Manufacture,2006,46(12/13):1459-1468. |
[2]
|
LIU J Ch,LI L J,YAN C.Discussion on direct manufacturing metallic pattern for sand mold based on laser cladding technology[J].Laser Technology,2003,27(6):572-576(in Chinese). |
[3]
|
YADROITSEV I,BERTRAND P,LAGET B,et al.Application of laser assisted technologies for fabrication of functionally graded coatings and objects for the international thermaonucear experimental reactor components[J].Journal of Nuclear Materials,2007,362(2/3):189-196. |
[4]
|
WU W H,YANG Y Q,HUANG Y L.Direct manufacturing of Cu-based alloy parts by selective laser melting[J].Chinese Optics Letters,2007,5(1):37-40. |
[5]
|
YADROITSEV I,SHISHKOVSKY I,BERTRAND P,et al.Manufacturing of fine-structured 3-D porous filter elements by selective laser melting[J].Applied Surface Science,2009,255(10):5523-5527. |
[6]
|
MTT Technologies Group.A world-class generative process developed for direct product realisation:selective laser meltingTM (SLM)[EB/OL].[2009-01-01].Http://www.mtt-group.com/selective-laser-melting.html. |
[7]
|
KRUTHA J P,FROYENB L,van VAERENBERGHA J,et al.Selective laser melting of iron-based powder[J].Journal of Materials Processing Technology,2004,149(1/3):616-622. |
[8]
|
YADROITSEV I,BERTRAND Ph,SMUROV I.Parametric analysis of the selective laser melting process[J].Applied Surface Science,2007,253(19):8064-8065. |
-
-
Proportional views
-