A stabilized fiber 3×3 coupler interferometric measurement system based on a first order feedback loop
-
1.
Department of Physics, School of Science, Beijing Jiaotong University, Beijing 100044, China
-
Received Date:
2009-06-09
Accepted Date:
2009-07-15
-
Abstract
In order to eliminate the influences resulting from environmental disturbances,a stabilized optical fiber interferometric measurement system configured with a fiber 3×3 coupler and fiber Bragg gratings(FBGs)was designed.By employing the FBGs as in-fiber reflective mirrors,both fiber Michelson interferometers in the system shared a commoninterferometric -optical path.One of the fiber interferometers was used to stabilize the system based on a first order electronic feedback loop for compensating for the environment jitter,while the other was used to perform the measurement task.The bandwidth of the feedback loop is 21Hz which endows the system stabilization for on-line precision measurement.
-
-
References
|
[1]
|
HAND D P,CAROLAN T A,BARTON J S,et al.Profile measurement of optically rough surfaces by fiber-optic interferometry[J].Opt Lett,1993,18(16):1361-1363. |
|
[2]
|
LIN D J,JIANG X Q,XIE F.High stability multiplexed fiber interferometer and its application on absolute displacement measurement and on-line surface metrology[J].Optics Express,2004,12(23):5729-5734. |
|
[3]
|
XIE F,ZHANG Sh,LI Y,et al.Study on the reflected wavelength shift based on sensing elements of in-fiber Bragg grating[J].Laser Technology,2002,26(2):84-85(in Chinese). |
|
[4]
|
JACKSON D A,DANDRIDGE A,TVENTEN A B.Elimination of drift in a single-mode optical fiber interferometer using a piezoeletric stretched coiled fiber[J].Appl Opt,1980,19(17):2926-2929. |
|
[5]
|
FRITSCH K,ADAMOVSKY G.Simple circuit for feedback stabilization of a single-mode optical fiber interferometer[J].Review of Science Instrument,1981,52(7):996-1000. |
|
[6]
|
UDD E.An overview of fiber-optic sensors[J].Review of Science Instrument,1995,66(8):40151-4030. |
|
[7]
|
KERSEY A D.A review of recent developments in fiber optic sensor technology[J].Optical Fiber Technology,1996,2(3):291-317. |
|
[8]
|
JIANG M,GERLAND E.A simple strain sensor using a thin film as a low-finesse fiber-optic Fabry-Perot interferometer[J].Sensors and Actuators,2001,A88(1):41-46. |
|
[9]
|
SEAT H C,OUISSE E,MORTEAU E,et al.Vibration-displacement measurements based on a polarimetric extrinsic fiber Fabry-Perot interferometer[J].Measurement Science & Technology,2003,14(6):710-716. |
|
[10]
|
LI D,ZHANG X H,HUANG J B.Theoretical analysis of feedback control on input light polarization of fiber optic interferometer[J].Laser Technology,2006,30(2):126-129(in Chinese). |
-
-
Proportional views
-
Map
DownLoad: