Numerical analysis of lubrication characteristics of laser texturing on motorcycle cylinder liner surface
-
1.
Faculty of Mechanical Precision Instrumental Engineering, Xi'an University of Technology, Xi'an 710048, China;
-
2.
School of Mechatronics Engineering, Wuyi University, Jiangmen 529020, China
-
Corresponding author:
WANG Da-cheng, dcwang@wyu.edu.cn
-
Received Date:
2008-12-24
Accepted Date:
2009-03-16
-
Abstract
In order to improve tribological property of motorcycle engine piston ring and cylinder liner and fuel economy characteristic,the technology of laser surface texturing was used to make regular micro geometric structure on the cylinder liner.The theoretical lubricating model of uniform distribution micro geometric structure in the form of micro pores was developed, including the Reynolds equation, oil-film thickness equation and dynamics equation.The model was solved by means of multi-grid method and the hydrodynamic pressure and oil-film thickness distribution were obtained. The results show that surface texturing can be used to maintain hydrodynamic effects and improve the lubrication performance efficiently, even with nominal parallel surfaces.
-
-
References
|
[1]
|
MENG F M,ZHANG Y Y.Development in fluid lubrication technologies in internal combustion engines and its application in china[J].Lubrication Engineering,2006,180(8):160-164(in Chinese). |
|
[2]
|
HSU S.An integrated surface technology for optimum performance[R].Gaithersburg,Maryland,US:National Institute of Standards and Technology,2005:1-41. |
|
[3]
|
WANG D Ch.Laser process technology and its application in motorcycle industry[J].Electromachining Mould,2001,33(2):9-13(in Chinese). |
|
[4]
|
WAN Y,XIONG D Sh.Study of laser surface texturing for improving tribological properties[J].Tribology,2006,26(6):603-607(in Chinese). |
|
[5]
|
RYK G,ETSION I.Testing piston rings with partial laser surface texturing for friction reduction[J].Wear,2006,261(7):792-796. |
|
[6]
|
RONEN A,ETSION I,KLIGERMAN Y.Friction reducing surface texturing in reciprocating automotive components[J].Tribology Transactions,2001,44(3):359-366. |
|
[7]
|
TIAN H,SAKA N,SUH N P.Boundary lubrication studies of undulated titanium surfaces[J].Tribology Transactions,1989,32(3):289-296. |
|
[8]
|
ETSION I,HALPERIN G.A laser surface textured hydrostatic mechanical seal[J].Tribology Transactions,2002,45(3):430-434. |
|
[9]
|
YU X Q,PENG P Y.Test research on friction performance of the laser-textured porous seal face[J].Lubrication Engineering,2006,180(8):34-37(in Chinese). |
|
[10]
|
FU Y H,YE Y X,ZHANG Y K,et al.Study on the technology of laser honing applied in machining the cylinder bore of engine[J].Laser Technology,2002,26(5):379-381(in Chinese). |
|
[11]
|
FU Y H,CHEN Zh H,WANG D Ch,et al.Research on laser surface micro texturing of regular micro geometric structure on surface of frictional units[J].Applied Laser,2006,26(4):233-236(in Chinese). |
|
[12]
|
WANG D Ch.Research of laser surface strengthening technique for HT300 camshaft of motorcycle[J].Laser Technology,2002,26(6):474-477(in Chinese). |
-
-
Proportional views
-
Map
DownLoad: