Study on technical parameters of laser welding HDPE plastics

CHU Xiao-meng; GU Pei-lan; YANG Jian-xin

doi:10.3969/j.issn.1001-3806.2010.01.033

In order to study the effect of technical parameters on the performance of high density polyethylene (HDPE) plastic welding pieces,with laser permeating a weld HDPE workpiece,mechanical tensile test was carried out and the morphology of the joint fracture was observed with a scanning electron microscopy. Results show that the joint intensity and elongation property accrete with smaller light spot and welding velocity and larger laser power. The welding joint is good and mechanical property is best with laser spot diameter in 2mm,laser power at 75W and welding velocity at 2mm/s. It is proved that laser welding HDPE is a feasible.

Study on technical parameters of laser welding HDPE plastics

1. Electro-mechanical General Factory, Jiangsu University, Zhenjian 212013, China

Received Date: 2008-11-20

Accepted Date: 2008-12-16

Available Online: 2010-01-25

Abstract: In order to study the effect of technical parameters on the performance of high density polyethylene (HDPE) plastic welding pieces,with laser permeating a weld HDPE workpiece,mechanical tensile test was carried out and the morphology of the joint fracture was observed with a scanning electron microscopy. Results show that the joint intensity and elongation property accrete with smaller light spot and welding velocity and larger laser power. The welding joint is good and mechanical property is best with laser spot diameter in 2mm,laser power at 75W and welding velocity at 2mm/s. It is proved that laser welding HDPE is a feasible.

HTML

Reference (10)

[1]	WANG X,DING G M,LIU H X.Investigation on laser welding plastics technology[J].Laser Journal,2007,28(4):68-69(in Chinese).
[2]	ZHANG Sh Y,ZHANG Sh H.Laser welding of plastics[J].Engineering Plastics Application,2000,28(2):15-17(in Chinese).
[3]	WANG X,HANG H Zh,DING G M,et al.Investigation on influence of additive on welding quality of laser transmission welding plastics[J].Applied Laser,2007,27(4):314-317(in Chinese).
[4]	YUAN H,LAI J J,HE Y G.Experimenntal study on laser welding of thermoplastics[J].Optics&Optoelectronic Technology,2005,3(1):18-21(in Chinese).
[5]	XIE L,LIU L M.Laser welding technology and properties of macromolecule material plastics[J].Transactions of the China Welding Institution,2007,28(5):97-100(in Chinese).
[6]	WAN Y L,CAI Y,WANG J Ch,et al.Technology of laser welding plastics[J].Applied Laser,2006,26(2):93-96(in Chinese).
[7]	LIU H X,ZHANG H Zh,JI J Q,et al.Methods and present status of laser welding of plastics[J].Laser Technology,2008,32(2):167-170(in Chinese).
[8]	ZHANG Sh Y.Application of plastics welding in automobile industry[J].Plastics,2004,33(6):89-94(in Chinese).
[9]	ZHAO X L,QI Sh H,ZHANG J,et al.The newest progress on modification research of phenolic resin[J].Modern Plastics Processing and Applications,2003,15(5):58-62(in Chinese).
[10]	QIN G L,LIN Sh Y.Laser welding volume energy and its influence on weld penetration in laser deep penetration welding[J].Transactions of the China Welding Institution,2006,27(7):74-76(in Chinese).

Study on technical parameters of laser welding HDPE plastics

Abstract

References

Proportional views

通讯作者: 陈斌, bchen63@163.com

Proportional views