[1] OHNESORGE W V.Die bildung von tropfen an düsen und die auflosung flüssiger strahlen[J].Für Angewandte Mathematik und Mecha-nik, 1936, 16(6):355-358. doi: 10.1002/zamm.19360160611
[2] WAGNER F, SIBAILLY O, VG N. The laser microjet technology-10 years of development[C]//International Congress on Applications of Lasers & Electro-Optics.New York, USA: Laser Institute of America, 2003: 1-9.
[3] FU Y H, CAO J, DONG F, et al.CFD simulation of the laser stable water beam in micro water-jet guided laser[J]. Fluid Machinery, 2013, 41(8):21-25(in Chinese).
[4] LEI Y L.The research of water guide laser cutting wafer pre-alignment and water guide laser coupling technology[D].Harbin: Harbin Institute of Technology, 2014: 32-40(in Chinese).
[5] SUN Sh T. Research of water guided laser devices and its machining properties[D].Harbin: Harbin Engineering University, 2012: 14-26 (in Chinese).
[6] LIN G S.Study on the key technology of water-jet guided laser machining[D].Wuhan: Huazhong University of Science and Technology, 2014: 8-23(in Chinese).
[7] YANG B J, XIE Sh D, DAI F.Design of coupling device for laser cutting guided by water beam[J]. Laser Technology, 2017, 41(2):247-250(in Chinese).
[8] ZHANG Zh, ZHANG G Y, ZHANG W W, et al.Mechanism analysis and preliminary processing test verification of water-air shrinkage based on new water-guided laser[J].Applied Laser, 2019, 39(2):291-296(in Chinese).
[9] TOMIYAMA A, SOU A, HOSOKAWA S. Effects of cavitation in a nozzle on liquid jet atomization[J]. International Journal of Heat and Mass Transfer, 2007, 50(17/18):3575-3582.
[10] ANNONI M, MONNO M. Effects of diamond orifice geometry on water jet cutting performance[C]//The 18th International Conference on Water Jetting.Bedfordshire, UK: BHR Group Limited, 2006: 293-308.
[11] LU X Zh, JIANG K Y, JANG F, et al.Laser mirco-jet enhanced processing laser energy distribution[J].Applied Laser, 2015, 35(2):230-235(in Chinese). doi: 10.3788/AL20153502.0230
[12] ZHANG Y H, LU T F, LIU Y X, et al.Intensities of non-uniformly polarized beams in the oceanic turbulence[J]. Laser Technology, 2020, 44(3):310-314(in Chinese).
[13] TAMAKI N, SHIMIZU M, HIROYASU H. Enhancement of the a-tomization of a liquid jet by cavitation in a nozzle hole[J]. Atomization and Sprays, 2001, 11(2):125-128.
[14] HIROYASU H.Spray breakup mechanism from the hole-type nozzle and its applications[J].Atomization and Sprays, 2000, 10(3/5):511-527.
[15] TAFRESHI H, POURDEYHIMI B.Simulating cavitation and hydraulic flip inside hydroentangling nozzles[J].Textile Research Journal, 2004, 74(4):359-364. doi: 10.1177/004051750407400413
[16] RICHERZHAGEN B.Method and apparatus for machining material with a liquid-guided laser beam: US5902499[P].1999-05-11.
[17] LI Ch Q.Research on water-jet guided laser micromachining system and key technologies [D].Harbin: Harbin Institute of Technology, 2012: 16-32(in Chinese).
[18] QIU Y L, ZHU G Zh, ZHU X, et al.Influence of water-jet waveguide with turbulent surface on the optical transmission losses[J].Chinese Journal of Laser, 2016, 43(1):116003(in Chinese).
[19] RAMAMURTHI K, PATNAIK S. Influence of periodic disturbances on inception of cavitation in sharp-edged orifices[J].Experiments in Fluids, 2002, 33(5):720-727. doi: 10.1007/s00348-002-0542-4
[20] CHIDA I, SHIIHARA K, NOMURA K, et al. Decreasing waste of laser cutting by metal fume capturing with water[C]//Proceedings of 22nd International Conference on Nuclear Engineering.New York, USA: American Society of Mechanical Engineers, 2014: 1-5.
[21] NURICK W H. Orifice cavitation and its effects on spray mixing[J].Journal of Fluids Engineering, 1976, 98(4):681-687. doi: 10.1115/1.3448452
[22] GHASSEMIEH E, VERSTEEG H K, ACAR M. Effect of nozzle geo-metry on the flow characteristics of hydroentangling jets[J]. Textile Research Journal, 2003, 73(5): 444-450. doi: 10.1177/004051750307300512
[23] BEGENIR A, VAHEDT T H, POURDEYHIMI B. Effects of the no-zzle geometry on hydroentangling waterjets: experimental study [J].Textile Research Journal, 2004, 74(2): 178-184. doi: 10.1177/004051750407400215