[1] THARUMARAJAH A,KOLTUN P.Is there an environmental advantage of using magnesium components for light weighting cars[J].Journal of Cleaner Production,2007,15(11):1007-1013.
[2] CHEN J F,ZHANG Y K,XU R J.Research progress on laser surface processing ofmagnesium alloy[J].Laser Technology,2008,32(3):293-295(in Chinese).
[3] LEI M K,LI P,YANG H G,et al.Wear and corrosion resistance of Al ion implanted AZ31 magnesium alloy[J].Surface & Coatings Technology,2007,201(9):5182-5185.
[4] ZHANG Y,XU Y.Influencing factors and protective methods of stress corrosion cracking of magnesium alloys[J].Journal of Harbin Institute of Technology,2009,41(6):87-89 (in Chinese).
[5] MONTROSS C S,WEI T,YE L,et al.Laser shock processing and its effects on microstructure and properties of metal alloys:a review[J].International Journal of Fatigue,2002,24(10):1021-1036.
[6] ZHANG Y K,CHEN J F,XU R J.Experimental research of laser shock strengthening AM50 magnesium alloy[J].Chinese Journel of Lasers,2008,35(7):1068-1071(in Chinese).
[7] ZHANG Y K,CHEN J F,LEI W N,et al.Effect of laser surface melting on friction and wear behavior of AM50 magnesium alloy[J].Surface and Coatings Technology,2008,202(14):3175-3179.
[8] LOU H F,WANG M P,TANG N,et al.Microstructures of twin-roll cast AZ31B Mg alloy and its deformation mechanism[J].Chinese Journal of Nonferrous Metals,2008,18(9):1584-1589(in Chinese).
[9] HOU L F,WEI Y H,LIU B S,et al.Microstructure evolution of AZ91D induced by high energy shot peening[J].Transactions of Nonferrous Metals Society of China,2008; 18(5):1053-1057.
[10] MORDYUK B N,MILMAN Y V,IEFIMOV M O,et al.Characterization of ultrasonically peened and laser-shock peened surface layers of AISI 321 stainless steel[J].Surface & Coatings Technology,2008,202(19):4875-4883.
[11] AN J,LI R G,LU Y,et al.Dry sliding wear behavior of magnesium alloys[J].Wear,2008,265(1):97-104.
[12] WEN S Z,HUANG P.Tribology principle[M].Beijing:Tsinghua University Press,2002:301-331(in Chinese).