[1] ZHANG J Y,GAO L X,CUI L L et al.Analysis of the temperature field induced by laser strengthening[J].Laser Technology,2006,30(1):56～59(in Chinese).
[2] ZENG D W,XIE Ch Sh.A numerical simulation for three dimensional quasi state fluid flow field and temperature field in molten pool for composite coating system[J].Laser Technology,2000,24(6):370～374(in Chinese).
[3] WANG X F,LÜ X D,CHEN G N et al.Simulation and verification of the temperature field in laser hardening[J].Laser Technology,2004,28(2):162～165(in Chinese).
[4] YE X H,CHENG X.Simulation of the fluid flow and heat transfer in laser heating melt pool using a region-dividing method[J].Chinese Journal of Laseres,2002,16(3):264～267(in Chinese).
[5] XI M Zh,YU G.Numerical simulation for the transient temperature field of 3-D moving laser molten pool[J].Chinese Journal of Lasers,2004,31(12):1527～1532(in Chinese).
[6] XI M Zh,ZHANG Y Zh,SHI L K et al.Numerical simulation of 3-Dtransient temperature field in thin-wall metal parts fabricated by laser direct deposition[J].The Chinese Journal of Nonferrous Metals,2003,13(4):887～892(in Chinese).
[7] YANG J.Research on mechanical behavior of laser rapid forming metal part[D].Xi'an:Northwestern Polytechnical University,2004.35～69(in Chinese).
[8] ZHU X K,CHAO Y J.Numerical simulation of transient temperature and residual stresses in friction stir welding of 304L stainless steel[J].Journal of Materials Processing Technology,2004,146:263～272.
[9] Chinese Iron-Steel Research Institute.Complex alloy steel manual:lower volume (first volume)[M].Beijing:Metallurgical Industry Press,1992.3～45(in Chinese).