[1] LI M Y. Study on laser surface modification of copper[D].Zhengzhou: Zhengzhou University, 2013: 1-3(in Chinese).
[2] CHEN S Y, LIANG J, LIU C S, et al. Preparation of a novel Ni/Co-based alloy gradient coating on surface of the crystallizer copper alloy by laser[J]. Applied Surface Science, 2011, 258(4):1443-1450. doi: 10.1016/j.apsusc.2011.09.101
[3] LIU F, LIU C, CHEN S Y, et al. Laser cladding Ni-Co duplex coating on copper substrate[J]. Optics & Lasers in Engineering, 2010, 48(48):792-799.
[4] ZHANG Y Z, TU Y, XI M Z, et al. Characterization on laser clad nickel based alloy coating on pure copper[J]. Surface & Coatings Technology, 2008, 202(24):5924-5928.
[5] TIAN F J, LIU W J, SHANG X F. Study on Ni60A coating on copper by laser cladding[J]. Heat Treatment of Metals, 2008, 33(12):35-37(in Chinese).
[6] LIU F, LIU C S, CHEN S Y, et al. Pulsed Nd:YAG laser post-treatment Ni-based crack-free coating on copper substrate and its wear properties[J]. Surface & Coatings Technology, 2007, 201(14):6332-6339.
[7] YAN H, WANG H. Nd:YAG laser cladding Ni base alloy/nano-h-BN self-lubricating composite coatings[J]. Materials Science and Technology, 2010, 26(4):461-468. doi: 10.1179/026708309X12468927349172
[8] CHEN S Y, DONG J, CHEN J. Nano-particles reinforced Co-based gradient coating with high wear resistance prepared in-situ by laser on surface of crystallizer copper alloy[J].Chinese Journal of Lasers, 2011, 38(7):0703006(in Chinese). doi: 10.3788/CJL
[9] LI Y, ZHANG Y Z, HUANG C, et al. Microstructure and electric conductivity of laser clad TiB2/Cu coating on pure copper[J]. Laser Technology, 2012, 36(5):585-588(in Chinese).
[10] YAN H, ZHANG J, ZHANG P L. Laser cladding of Co-based alloy/TiC/CaF2 self-lubricating composite coatings on copper for continuous casting mold[J]. Surface and Coatings Technology, 2013, 232:362-369. doi: 10.1016/j.surfcoat.2013.05.036
[11] ZHOU S F, ZENG X Y, HU Q W, et al. Process study of Ni-based WC composite coatings by means of laser-induction hybrid cladding[J]. Laser Technology, 2009, 33(2):124-126(in Chinese).
[12] ZHOU S F, DAI X Q, ZHENG H Z. Characteristics on structure and properties of WC Ni60A coatings by laser cladding and laser induction hybrid cladding[J].Journal of Mechanical Engineering, 2012, 48(7):113-118(in Chinese). doi: 10.3901/JME.2012.07.113
[13] ZHOU S F, ZHANG T Y, XIONG Z, et al. Investigation of Cu-Fe-based coating produced on copper alloy substrate by laser induction hybrid rapid cladding[J]. Optics & Laser Technology, 2014, 59(7):131-136.
[14] FARAHMAND P, KOVACEVIC R. Laser cladding assisted with an induction heater (LCAIH) of Ni-60%WC coating[J]. Journal of Materials Processing Technology, 2015, 222:244-258. doi: 10.1016/j.jmatprotec.2015.02.026
[15] FARAHMAND P, LIU S, ZHANG Z, et al. Laser cladding assisted by induction heating of Ni-WC composite enhanced by nano-WC and La2O3[J]. Ceramics International, 2014, 40(10):15421-15438. doi: 10.1016/j.ceramint.2014.06.097
[16] TOYSERKANI E, KHAJEPOUR A, CORBIN S. Laser cladding[M]. New York, USA:CRC Press, 2005:88-96.
[17] DAVIS J R. ASM specialty handbook:copper and copper alloys[M]. Materials Park, USA:ASM International, 2001:446-452.
[18] DAVIS J R. ASM specialty handbook:nickel, cobalt, and their alloys[M]. Materials Park, USA:ASM International, 2000:36-37.
[19] LIDE D R. Handbook of chemistry and physics[M]. New York, USA:CRC Press, 2003, 12:190-219.
[20] CHEN E P. Method and empirical formula to calculate melting point of the iron-based, nickel-based and cobalt-based alloy[J]. Special Steel, 1992, 13(2):28-30(in Chinese).
[21] RHODIN M. Calculation of welding deformations in a pipe flange master's thesis in applied mechanics[D]. Gothenburg, Sweden: Chalmers University of Technology, 2012: 17-18.