[1] LI P, SUN G F, ZHANG W, et al. The failure and enhancing techniques for blade of high-speed mixing machine[J].Pastics,2011,40(6):61-64 (in Chinese).
[2] HU X M, ZHANG W. Discussion for the problems in the structure design of plastics mixer[J]. Engineering Plastics Application, 2001, 29(2): 32-35 (in Chinese).
[3] MAJUMDAR J D, CHANDRA B R, MANNA I. Laser composite surfacing of AISI 304 stainless steel with titanium boride for improved wear resistance[J]. Tribology International, 2007, 40(1): 146-152.
[4] TIAN Y Sh, CHEN Ch Zh, WANG D Y, et al. Analysis of the growth mechanism of TiC crystal and the mechanical properties of the laser alloyed layer on the surface of pure titanium[J]. Laser Technology, 2005, 29(2): 113-115(in Chinese).
[5] SUN G F, ZHOU R, LI P, et al. Laser surface alloying of C-B-W-Cr powders on nodular cast iron rolls[J]. Surface and Coatings Technology, 2011, 205(8/9): 2747-2754.
[6] HAN T, WANG A H, PENG J, et al. Submicron MC-type reinforced coating produced by laser alloying[J]. Laser Technology, 2012, 36(4): 441-444 (in Chinese).
[7] ANANDAN S, PITYANA S, DUTTA M J. Structure-property-correlation in laser surface alloyed AISI 304 stainless steel with WC+ Ni+NiCr[J]. Materials Science and Engineering,2012,A536(11):159-169.
[8] NATH S, PITYANA S, DUTTA M J. Laser surface alloying of aluminium with WC+Co+NiCr for improved wear resistance[J]. Surface and Coatings Technology, 2012, 206(15): 3333-3341.
[9] ZHONG M L, LIU W J, ZHANG H J. Corrosion and wear resistance characteristics of NiCr coating by laser alloying with powder feeding on grey iron liner[J]. Wear, 2006, 260(11/12): 1349-1355.
[10] HEYDARZADEH S M, EBRAHIMI M, GHASEMI H M, et al. Microstructural study of surface melted and chromium surface alloyed ductile iron[J]. Applied Surface Science, 2012, 258(19): 7348-7353.
[11] SHAN J G, REN J L, DING J Ch, et al. Microstructure and wear resistance of Cr powder alloying layers on cast iron[J]. Laser Technology, 2004, 28(1): 1-4 (in Chinese).
[12] JORDAN L R, BETTS A J, DAHM K L, et al. Corrosion and passivation mechanism of chromium diboride coatings on stainless steel[J]. Corrosion Science, 2005, 47(5): 1085-1096.
[13] KIRYUKHANTSEV-KORNEEV P V, PIERSON J F, PETRZHIK M I, et al. Effect of nitrogen partial pressure on the structure, physical and mechanical properties of CrB2 and Cr-B-N films[J]. Thin Solid Films, 2009, 517(8): 2675-2680.
[14] LI G, LIU L, HOU J Y, et al. Study on microstructure and performance of laser cladding Ni-Zr-Nb-Al amorphous composite coating[J]. Laser Technology, 2011, 35(2): 185-188 (in Chinese).
[15] COSTA L, LANSFORD K, RAJPUT D, et al. Unique corrosion and wear resistant identification tags via LISITM laser marking[J]. Surface & Coating Technology, 2009, 203(14): 1984-1990.
[16] RAJPUT D, LANSFORD K, COSTA L, et al. Molybdenum-on-chromium dual coating on steel[J]. Surface and Coatings Technology, 2009, 203(9): 1281-1287.
[17] YUE T M, YU J K, MAN H C. The effect of excimer laser surface treatment on pitting corrosion resistance of 316LS stainless steel[J]. Surface and Coatings Technology, 2001, 137(1): 65-71.
[18] NIU Sh R. The research of electrochemical corossion resistance of stalnless steels[D].Lanzhou:Lanzhou University of Technology, 2010: 31-32 (in Chinese).
[19] LLEWEUYN D T, HUDD R C. Steels:metallurgy and applications[M]. Oxford,UK: Reed Educational and Professional Publishing Ltd.,1998:321.
[20] DONG H L.The effect of deformation on microstructure and properties of 304 austenitic stainless steel[D]. Nanjing: Nanjing University of Seienee & Technology, 2010: 28-29 (in Chinese).