[1] |
ZHANG Ch Ch, SHI Y. Current status and development of high thickness coating by laser cladding technology[J].Laser Technology,2011, 35(4):448-452(in Chinese). |
[2] |
LI G, LIU L, HONG J Y, et al. Study on microstructure and performance of laser cladding Ni-Zr-Nb-Al amorphous composite coating[J].Laser Technology,2011,35(2):185-188(in Chinese). |
[3] |
CUI A Y, HU F Y, LU C L , et al. Microstructure and property of laser cladding Ti-matrix functional gradient layer [J].Laser Technology,2012,36(2):262-264(in Chinese). |
[4] |
MAO M H, WU G, WU Q L, et al. Microstructure and corrosion behaviorof in-situ Cr7C3 ceramic prepared by laser cladding[J].Corrosion & Protection,2012,33(6):466-469(in Chinese). |
[5] |
ZHONG W H, LIU G Zh, GAO Y, et al. Effect of WC on microstructure and propertise of Ni-Cr3C2 cladding layer[J].Material & Heat Treatment,2012,41(10):153-156(in Chinese). |
[6] |
MAO M H. Research on properties of Cr7C3 on Q235 steel surface prepared by laser cladding[J].Science & Technology Inrmation,2012,33(5):111-113(in Chinese). |
[7] |
ZHANG D W, LEI T C.The microstructure and erosive-corrosive wear performance of laser-clad Ni-Cr3C2 composite coating[J].Wear,2003,255(2):129-133. |
[8] |
YUAN Q L, FENG X D, CAO J J, et al. Effect of laser scanning speeds on the microstructure and corrosion resistance of laser cladding layers[J]. Laser Technology,2011,35(2):163-166(in Chinese). |
[9] |
LOU D Y, HE Ch L, SHUO Sh. Microstructure and performances of graphite scattered Cr3C2-NiCr composites prepared by laser processing[J]. Materials Letters,2013,93(3):304-307. |
[10] |
ZHANG D W, LI T, LEI T C. Laser cladding of Ni-Cr3C2/(Ni+Cr) composite coating[J]. Surface & Coatings Technology,1998,110(2):81-85. |
[11] |
BETTS J C. The direct laser deposition of AISI316 stainless steel and Cr3C2powder[J].Journal of Materials Processing Technology,2009,209(2):5229-5238. |
[12] |
LI H, YAN W, CHEN J, et al. Study of Fe-Cr-C hypereutectic alloy formed in-sutu under unidirectional solidification[J].Foundry Technology,2007,28(3):307-311(in Chinese). |