有限元法移动激光除漆的温度场分析与实验研究

刘彩飞; 冯国英; 邓国亮; 吴常顺; 陈康喜; 王德良

doi:10.7510/jgjs.issn.1001-3806.2016.02.026

有限元法移动激光除漆的温度场分析与实验研究

1.
四川大学电子信息学院激光微纳工程研究所, 成都 610064

作者简介: 刘彩飞(1988-),男,硕士研究生,现主要从事激光与物质相互作用的研究。.

通讯作者: 冯国英, guoying-feng@scu.edu.cn ;

基金项目:
国家自然科学基金资助项目(60890203)
中图分类号: TG156.99

Temperature field analysis and experiment study about paint irradiated by moving laser based on FEM

1.
Institute of Laser & Micro/Nano Engineering, School of Electrical Engineering and Information, Sichuan University, Chengdu 610064, China

Corresponding author: FENG Guoying, guoying-feng@scu.edu.cn ;

CLC number: TG156.99

摘要: 为了研究脉冲激光去除金属表面漆膜的过程,采用有限元法建立模型,模拟了喷有漆膜的不锈钢样品表面在移动脉冲激光作用下的温度场,研究了不同时刻漆膜表面的温度场分布以及激光参量对漆膜表面温度场的影响,并做了相关对比实验。结果表明,漆膜表面温度随激光源的移动而变化,温度场呈现带尾的彗星状;漆膜表面的温度随激光能流密度和激光重复率的增加而线性增加,随着扫描速率的增加而指数递减;激光能流密度和激光重复率越大而激光扫描速率越小时,激光除漆效率越高;温度的累积效应可以提高除漆的效率。该结果可以为实际激光除漆过程中激光参量的选取提供参考。
- 激光技术 /
- 激光除漆 /
- ANSYS软件 /
- 能流密度 /
- 扫描速率 /
- 激光重复率
Abstract: In order to analyze the process of laser removal of paint on metal surface, the model was established by using finite element method (FEM). Temperature distribution on stainless steel surface with paint film irradiated by moving laser was simulated. The relative and comparative experiment was done. The results show that, temperature of paint film changes with the movement of laser source. Temperature distribution has a rendering tail like comet-shape. The peak temperature of paint film increases linearly with the increase of laser fluence and laser repetition rate, and decreases exponentially with the increase of scanning rate. The higher the laser fluence and repetition rate, the higher the paint removal efficiency. Cumulative effect of temperature can improve the efficiency of removing paint. The results can give references to select laser parameters in the process of laser paint removal.
- laser technique /
- laser removal of paint /
- ANSYS software /
- laser energy density /
- scanning rate /
- laser repetition rate

[1]	NEVRS P, ARRONTE M, VILAR R, et al. KrF excimer laser dry and steam cleaning of silicon surfaces with metallic particulate contaminants[J]. Applied Physics, 2002,A74(2):192-194.
[2]	ASMUS J F. Non-divestment laser applications in art conservation[J]. Journal of Cultural Heritage,2003,4(s1):289-293.
[3]	ZHU Y F, TAN R Q. Graffiti removal-new applications of laser cleaning[J].Laser Infrared, 2011, 41(8):840-844(in Chinese).
[4]	ZHAO Z M. The application of laser cleaning technology in microelectronics industry field[J]. Cleaning Technology, 2004,2(8):29-34(in Chinese).
[5]	BARLETTA M, GISARIO A, TAGLIAFERRI V. Advance in paint stripping from aluminium substrates[J]. Journal of Materials Processing Technology, 2006, 173(2):232-239.
[6]	SCHWEIZER G, WERNER L. Industrial 2kW TEA CO2 laser for paintstripping of aircraft[J]. Proceedings of the SPIE,1995, 2502:57-62.
[7]	CHEN G X, KWEE T J, TAN K P, et al. Laser cleaning of steel for paint removal[J]. Applied Physics, 2010, A101(2):249-253.
[8]	BRYGO F, DUTOUQUET C, le GUERN F, et al. Laser fluence, repetition rate and pulse duration effects on paint ablation[J]. Applied Surface Science, 2006, 252(6):2131-2138.
[9]	BRYGO F, SEMEROK A, OLTRA R, et al. Laser heating and ablation at high repetition rate in thermal confinement regime[J]. Applied Surface Science, 2006, 252(23):8314-8318.
[10]	TEULE R, SCHOLTEN H, van den BRINK O F, et al. Controlled UV laser cleaning of painted artworks:a systematic effect study on egg tempera paint samples[J]. Journal of Cultural Hervitage, 2003,4(s1):209-215.
[11]	CIOFINI D, OSTICIOLI I, PAVIA A, et al. Removal of overpaintings from easel paintings using LQS Nd:YAG laser[J]. Applied Physics, 2014, A117(1):341-346.
[12]	ZHOU G L, KONG L B, SUN H Y, et al. Finite element analysis of temperature field based on ANSYS in laser cleaning mold[J]. Manufacturing Automation, 2008, 30(9):90-92(in Chinese).
[13]	MENG Q R, ZOU Y, JIA S K, et al. Effect of laser remelting on heat insulation performance of plasma sprayed ZrO2-20%Y2O thermal barrier coatings[J]. High Power Laser and Particle Beams, 2014, 26(7):079001(in Chinese).
[14]	YANG J, HAN J H, DUAN T, et al. Mechanical analysis of paint film stripping from aluminum plate surface by means of nanosecond laser[J]. Laser Technology, 2013, 37(6):718-722(in Chinese).
[15]	XIAN H, FENG G Y, WANG S P, et al. Laser transmission model in paint and related experimental[J]. Journal of Sichuan University(Natural Science Edition), 2012, 49(5):1036-1042(in Chinese).
[16]	YUAN W, LI Z G, CAI Y G, et al. Simulation of ANSYS-based laser cutting temperature field[J]. Journal of Changchun University, 2013, 23(12):1561-1564(in Chinese).
[17]	JIAO J, WANG X. A numerical simulation of machining glass by dual CO2-laser beams[J]. Optics Laser Technology, 2008, 40(2):297-301.
[18]	DONG Z B, WEI H Y, LIU R P, et al. The simulation of welding temperature at 3-D field on the stainless steel[J]. Transactions of the China Welding Institution, 2004, 25(2):9-14(in Chinese).
[19]	FENG Y S, LI X X. ANSYS numerical simulation of temperature field in silica glass irradiated by pulsed laser[J]. Physics Experimentation, 2012, 32(2):35-38(in Chinese).
[20]	WEN Y, YAN J X. The simulation study of interaction of laser with material based on ANSYS[J]. Optical Technique, 2005, 31(s1):250-253(in Chinese).
[21]	YANG S M, TAO W Q. Heat transfer[M]:4rd ed. Beijing:Higher Education Press,1998:555-556(in Chinese).
[22]	SONG F, ZOU W F, TIAN B, et al. Model of one-dimensional thernal stress applied in paint removal by Q switched short pulse laser[J]. Chinese Journal of Lasers, 2008, 34(11):1577-1581(in Chinese).
[23]	JIAO J, WANG X. Cutting glass substrates with dual-laser beams[J]. Optics and Lasers in Engineering, 2009, 47(7/8):860-864.

[1]	何昱煜 , 刘益剑 , 陈明 , 黄无云 , 戴鑫 , 毛建良 , 徐泽玮 . 激光扫描速率与熔覆层组织性能的规律研究. 激光技术, 2019, 43(2): 201-204. doi: 10.7510/jgjs.issn.1001-3806.2019.02.010
[2]	刘鹏良 , 孙文磊 , 王恪典 , 黄海博 . 扫描速率对激光熔覆镍基合金涂层性能的影响. 激光技术, 2018, 42(6): 845-848. doi: 10.7510/jgjs.issn.1001-3806.2018.06.022
[3]	袁庆龙 , 冯旭东 , 曹晶晶 , 苏志俊 . 扫描速率对激光熔覆层组织及耐蚀性的影响. 激光技术, 2011, 35(2): 163-166. doi: 10.3969/j.issn.1001-3806.2011.02.006
[4]	雷震 , 张立文 , 张晓玲 , 孟庆端 . 高斯激光辐照焦平面探测器温度场分析与仿真. 激光技术, 2016, 40(4): 516-520. doi: 10.7510/jgjs.issn.1001-3806.2016.04.013
[5]	谢林圯 , 吴腾 , 龚美美 , 马孝铭 , 师文庆 , 黄江 , 谢玉萍 , 何宽芳 . 单道激光熔覆温度场仿真及实验研究. 激光技术, 2022, 46(2): 226-232. doi: 10.7510/jgjs.issn.1001-3806.2022.02.013
[6]	晁祥瑞 , 黄勇 , 陈子鹏 , 许学虎 , 李文建 , 王宁 , 张志虎 . 激光重熔对In718熔覆层组织与性能的影响. 激光技术, 2023, 47(4): 506-512. doi: 10.7510/jgjs.issn.1001-3806.2023.04.010
[7]	王扬 , 路华 , 谭建国 . 板材激光加热弯曲成型的研究. 激光技术, 2003, 27(3): 175-177.
[8]	陈赟 , 黄海鹏 , 叶德俊 , 郝本田 . 基于贝叶斯判别的激光除漆声学监测方法研究. 激光技术, 2022, 46(2): 248-253. doi: 10.7510/jgjs.issn.1001-3806.2022.02.016
[9]	吴侃 , 敖建锋 , 方茜 . 地面3维激光扫描技术建筑物特征线提取. 激光技术, 2012, 36(4): 553-556. doi: 10.3969/j.issn.1001-806.2012.04.030
[10]	朱小伟 , 胡龙 , 杨文锋 , 孙兵涛 , 李绍龙 , 曹宇 . 基于CFRP纤维编织网格分块扫描的激光除胶工艺算法. 激光技术, 2021, 45(6): 745-750. doi: 10.7510/jgjs.issn.1001-3806.2021.06.012
[11]	赵兴海 , 高杨 , 程永生 . 激光点火技术综述. 激光技术, 2007, 31(3): 306-310,313.
[12]	胡增荣 , 童国权 , 陈长军 , 郭华锋 , 周亮 , 徐家乐 . 激光纳米表面工程技术. 激光技术, 2014, 38(6): 764-770. doi: 10.7510/jgjs.issn.1001-3806.2014.06.009
[13]	庞盛永 , 陈立亮 , 陈涛 , 殷亚军 , 胡伦骥 , 刘建华 . 激光深熔焊接任意形状小孔的能量密度计算. 激光技术, 2010, 34(5): 614-618. doi: 10.3969/j.issn.1001-3806.2010.O5.011
[14]	李慧 , 王志敏 , 张丰丰 , 王明强 , 李家佳 , 崔大复 , 彭钦军 , 许祖彦 . 全固态单频激光技术. 激光技术, 2016, 40(1): 141-147. doi: 10.7510/jgjs.issn.1001-3806.2016.01.031
[15]	赵长明 , 王云石 , 郭陆灯 , 张海洋 , 张子龙 , 张立伟 , 郑征 , 李建 . 激光无线能量传输技术的发展. 激光技术, 2020, 44(5): 538-545. doi: 10.7510/jgjs.issn.1001-3806.2020.05.003
[16]	王平江 , 吴浩 , 陈吉红 , 唐小琦 . 动光式激光切割无缝拼接技术的研究与应用. 激光技术, 2009, 33(4): 369-373. doi: 10.3969/j.issn.1001-3806.2009.04.010
[17]	金谏 , 周若阳 , 赵金峰 , 潘永东 , 刘学增 , 桑运龙 , 顾盛 . 激光扫描混凝土裂缝的超声检测. 激光技术, 2019, 43(4): 453-459. doi: 10.7510/jgjs.issn.1001-3806.2019.04.004
[18]	焦健 , 张朝阳 , 戴学仁 , 朱浩 , 徐坤 , 顾秦铭 . 激光辅助复合电沉积加工速率及表面质量研究. 激光技术, 2018, 42(6): 739-744. doi: 10.7510/jgjs.issn.1001-3806.2018.06.003
[19]	张宝武 , 支理想 , 张文涛 , 贾梦翔 . 基片衍射时原子速率对激光汇聚铬原子沉积的影响. 激光技术, 2013, 37(4): 421-424. doi: 10.7510/jgjs.issn.1001-3806.2013.04.002
[20]	杨淑连 . 基于激光光热位移技术纳米材料热扩散率的测量. 激光技术, 2007, 31(1): 29-30.

点击查看大图

计量

文章访问数: 7131
HTML全文浏览量: 4956
PDF下载量: 400
被引次数: 0

姓名
邮箱
手机号码
标题
留言内容
验证码

留言板

有限元法移动激光除漆的温度场分析与实验研究

作者简介: 刘彩飞(1988-),男,硕士研究生,现主要从事激光与物质相互作用的研究。.

通讯作者: 冯国英, guoying-feng@scu.edu.cn ;

Temperature field analysis and experiment study about paint irradiated by moving laser based on FEM

Corresponding author: FENG Guoying, guoying-feng@scu.edu.cn ;

计量

有限元法移动激光除漆的温度场分析与实验研究

通讯作者: 冯国英, guoying-feng@scu.edu.cn;

作者简介: 刘彩飞(1988-),男,硕士研究生,现主要从事激光与物质相互作用的研究。

English Abstract

Temperature field analysis and experiment study about paint irradiated by moving laser based on FEM

Corresponding author: FENG Guoying, guoying-feng@scu.edu.cn

全文HTML

目录

留言板

有限元法移动激光除漆的温度场分析与实验研究

作者简介: 刘彩飞(1988-),男,硕士研究生,现主要从事激光与物质相互作用的研究。.

通讯作者: 冯国英, guoying-feng@scu.edu.cn ;

Temperature field analysis and experiment study about paint irradiated by moving laser based on FEM

Corresponding author: FENG Guoying, guoying-feng@scu.edu.cn ;

计量

出版历程

有限元法移动激光除漆的温度场分析与实验研究

通讯作者: 冯国英, guoying-feng@scu.edu.cn;

作者简介: 刘彩飞(1988-),男,硕士研究生,现主要从事激光与物质相互作用的研究。

English Abstract

Temperature field analysis and experiment study about paint irradiated by moving laser based on FEM

Corresponding author: FENG Guoying, guoying-feng@scu.edu.cn

全文HTML

目录