|
[1]
|
ZHENG J Y, HE W. Review of research actuality and development directions of pulsed power technology[J]. Mechanical and Electrical Engineering Magzine, 2008, 25(4):1-4(in Chinese). |
|
[2]
|
ZHANG D D, YAN P, WANG J. Magnetic component design and circuit simulation for MPC system[J]. High Voltage Apparatus, 2009, 45(1):18-24(in Chinese). |
|
[3]
|
YANG Sh, ZHONG H H, YANG H W, et al. Design of magnetic switch based on metglas magnetic core[J]. High Power Laser and Particle Beams, 2010, 22(5):1172-1176(in Chinese). |
|
[4]
|
NESS R, MELCHER P, FERGUSON G, et al. A decade of solid state pulsed power development at Cymer Inc[C]//2004 IEEE International Power Modulator Conference. New York,USA:IEEE,2004:228-233. |
|
[5]
|
POKRYVAILO A, YANKELEVICH Y, WOLF M, et al. A high-power pulsed corona source for pollution control applications[J]. IEEE Transactions on Plasma Science,2004, 32(5):2045-2054. |
|
[6]
|
YOU L B, LIANG X, YU Y Sh, et al. Design and experimental study of all solid state pulse power module for excimer laser[J]. High Power Laser and Particle Beams, 2009, 21(11):1750-1754(in Chinese). |
|
[7]
|
LI Y Ch, YOU L B, WANG Q Sh, et al. Core reset in a magnetic pulse compression switch ofan excimer laser power supply[J]. Laser Technology, 2013, 37(6):803-807(in Chinese). |
|
[8]
|
ZHANG D D, YAN P, WANG J. Simulation on a magnetic pulse compression system[J]. High Power Laser and Particle Beams, 2008, 20(3):497-500(in Chinese). |
|
[9]
|
WANG D D, QIU J, LIU K F. All solid-state pulsed power generator with semiconductor and magnetic switches[J]. High Power Laser and Particle Beams, 2010, 22(4):730-734(in Chinese). |
|
[10]
|
LI Y B, LIANG X, ZHAO J M, et al. High precision voltage control for MOPA excimer laser[J]. Laser Technology, 2013, 37(5):660-663(in Chinese). |
|
[11]
|
ZHAO J M, GAO J, LIANG X, et al. Study on pulse charge power for a dual-chamber excimer laser[J]. Laser Technology, 2013, 37(1):97-100(in Chinese). |
|
[12]
|
JIANG W, MATSUDA T, YATSUI K, et al. High repetition-rate, low jitter pulsed power generator for excimer laser applications[C]//Power Modulator Symposium, 2002 and 2002 High-Voltage Workshop. New York, USA:IEEE, 2002:605-607. |
|
[13]
|
NESS R M,MELCHER P C,SAETHRE R B.Timing and synchronization of solid state pulse power modules(SSPPM) for excimer laser application[C]//Power Modulator Symposium, 2002 and 2002 High-Voltage Workshop Conference Record of the Twenty-Fifth International. New York, USA:IEEE, 2002:525-528. |
|
[14]
|
HU Y W. Studies on magnetic switch controlled discharge circuit for excimer laser[D]. Wuhan:Huazhong University of Science and Technology, 2013:41-43(in Chinese). |
|
[15]
|
ZHAO Y X. Pspice and electronic device model[M]. Beijing:Beijing University of Posts and Telecommunications Press, 2004:33-36(in Chinese). |
|
[16]
|
ZHANG D H, YAN P, GAO Y H. Using methods of transformer in pspice[J]. Electronical Application, 2007, 26(1):21-26(in Chinese). |
|
[17]
|
HU Y W, ZUO D L, WANG X B, et al. A pulsed source for excimer laser:China, 201210493440.6[P]. 2012-11-28(in Chinese). |
网站地图
点击查看大图
下载:
