激光再制造闭环控制系统的研究现状及发展

任维彬; 董世运; 徐滨士; 王玉江; 闫世兴

doi:10.7510/jgjs.issn.1001-3806.2016.01.023

激光再制造闭环控制系统的研究现状及发展

1.
装甲兵工程学院装备再制造技术国防科技重点实验室, 北京 100072;
2.
中国人民解放军 65589部队, 瓦房店 116300

作者简介: 任维彬(1983-),男,博士研究生,现主要从事激光再制造形状控制方面的研究。.

通讯作者: 董世运, syd422@sohu.com ;

基金项目:
国家九七三重点基础研究发展计划资助项目(2011CB013403)
中图分类号: TN249

Research advance and development of laser remanufacture closed-loop control systems

1.
National Key Laboratory for Remanufacturing, Academy of Armored Forces Engineering, Beijing 100072, China;
2.
2

Corresponding author: DONG Shiyun, syd422@sohu.com ;

CLC number: TN249

摘要: 闭环控制系统在激光再制造工程中的应用,对提高激光再制造产品形状尺寸精度以及成形控制过程自动化、智能化水平具有重要意义,并具有广阔的发展空间。从闭环控制系统原理及结构出发,对以熔池形状、3维尺寸、熔池温度、激光功率以及多信号联合等方式为监测方法的典型闭环控制系统进行分析,同时就出光位置调整、送粉速率调节、激光功率控制等主要控制方法进行概述,并从顶层设计、传感器精度、算法复杂度以及系统实时性和可靠性等方面对系统构建的关键性环节进行总结。在分析对比国内外激光再制造闭环控制系统研究进展及相关局限性基础上,分析归纳系统构建难点,指出了激光再制造闭环控制系统将向算法智能化、传感器集成化、控制参量综合化以及监测控制网络化的方向发展。
- 激光技术 /
- 闭环控制 /
- 激光再制造 /
- 研究局限性 /
- 研究现状
Abstract: The application of closed-loop control system in laser remanufacture is important to improve dimension precision, automation of forming course and intellectualization and has broad space to develop. Typical closed-loop control systems adopting molten geometry, 3-D size, molten pool temperature, laser power and multi-signal combination as monitoring methods, were analyzed from the principle and structures of closed-loop control systems. Meanwhile, the main control methods, such as laser position adjustment, powder feeding rate regulation or laser power control were introduced. Further, key links of construction were summarized in view of top-level design, sensor accuracy, algorithm complexity, reliability and system real-time. Based on the analysis of progress and related limitations of closed-loop control systems aboard and in China, construction difficulty of closed-loop control system was analyzed and concluded. The development directions, such as algorithm intellectualization, sensors integration, controlling parameters comprehensiveness, monitoring controlling network, were also put forward.
- laser technique /
- closed-loop control /
- laser remanufacture /
- research limitation /
- research situation

[1]	XU B S. The theory and technology for equipment remanufacturing engineering[M]. Beijing:National Defense Industry Press, 2007:12-16(in Chinese).
[2]	CAI L F, ZHANG Y Z, SHI L K. Microstructure and formation mechanism of titanium matrix composites coating on Ti-6Al-4V by laser cladding[J]. Rare Metal Materials and Engineering, 2007, 26(4):342-346.
[3]	ZHANG W P, LIU W Y. Progress of laser cladding about ceramic coating[J]. Surface Technology, 2011, 30(8):30-33(in Chinese).
[4]	CHEN H H, XU C Y, CHEN J, et al. Microstructure and phase transformation of WC/Ni60B laser cladding coating during dry sliding wear[J].Wear, 2008, 26(4):487-493.
[5]	YU J. The study of monitoring and controlling dimensions of deposition layers in the laser rapid forming process[D].Xi'an:Northwestern Polytechnical University,2007:42-46(in Chinese).
[6]	ZHANG K, LIU W, SHANG X F, et al. Development of research on directly rapid prototyping of metal materials and components by multi-layer cladding[J].Laser Journal, 2005, 26(4):4-8(in Chinese).
[7]	ZHONG M L, NING G Q, LIU W J. Research and development on laser direct manufacturing metallic components[J]. Laser Technology, 2002, 26(5):388-391(in Chinese).
[8]	NING G Q, ZHONG M L, YANG L. Research about close-loop control system during laser direct manufacturing metallic components[J]. Applied Laser, 2002, 22(2):172-176(in Chinese).
[9]	PENG D F, WANG Y Q, LI B. Real-time power measurement and control system of high power CO2 lasers[J]. Laser Technology, 2006, 30(5):483-485(in Chinese).
[10]	TAN H, CHEN J, YANG H O, et al. Real-time sensing and closed-loop control of laser rapid forming process[J]. Applied Laser, 2005, 25(2):73-76(in Chinese).
[11]	LINK G R. Rapid tooling die case inserts using shape deposition manufacturing[J]. Materials and Manufacturing Processing,1998,13(2):263-274.
[12]	HU Y P. An analysis of powder feeding systems on the quality of laser cladding[J].Advances in Powder Metallurgy Particulate Materials, 1997, 21(7):17-31.
[13]	LI L. In process laser power monitoring and feedback control for stable production of full-penetration weld in continuous wave fibre laser welding[J]. Journal of Physics, 2009, D42(8):36-45.
[14]	HERALIC' A, CHRISTIANSSON A K, OTTOSSON M, et al. Increased stability in laser metal wire deposition through feedback from optical measurements[J].Optics and Lasers in Engineering, 2010, 48(4):478-485.
[15]	BOUHAL M A. Tracking control and trajectory planning in layered manufacturing applications[J]. IEEE Transaction on Industrial Electronics, 1999, 46(2):445-451.
[16]	FANG T, JAFARI M A. Statistical feedback control architecture for layered manufacturing[J]. Journal of Materials Processing and Ma-nufacturing Science, 1999, 37(7):391-404.
[17]	DOUMANIDIS C, SKOREDLI E. Distributed parameter modeling for geometry control of manufacturing processes with material deposition[J]. ASME Journal of Dynamic Systems, Measurement and Control, 2000, 122(1):71-77.
[18]	RADOVAN K, SYED H, YILDIRIM H, et al. Thermo-kineticand-structural modeling and experimental investigations of laser power deposition process[D].Dallas,Texas,USA:Lyle School of Engineering Southern Methodist University, 2009:56-60.
[19]	CHEN W Zh, JIA L, ZHANG X D, et al. Coaxial vision sensing system and detection of penetration status in CO2 laser welding[J].Applied Laser, 2004, 24(3):130-134(in Chinese).
[20]	LEI J B, YANG X C,CHEN J, et al. Study on measurement of temperature field in laser molten pool[J]. Journal Huazhong University of Science and Technology(Nature Science Edition), 2007, 35(1):112-114(in Chinese).
[21]	MENG X X. Study on the process of fiber laser welding based on the technology of high-speed camera[D]. Wuhan:Huazhong University of Science and Technology, 2011:25-27(in Chinese).
[22]	MAZUMDER J, DUTTA D, KIKUCHI N, et al. Closed loop direct metal deposition:art to part[J]. Optics and Lasers in Engineering, 2000, 34(4/6):397-414.
[23]	ZHANG Y, YAO J H, HU X D, et al. Design of measurement system of powder flow in laser remanufacturing technology[J].Laser Technology, 2009, 33(6):568-570(in Chinese).
[24]	XIA R B, LIU W J, WANG Y C. Factors affecting precision during laser direct manufacturing metallic components and advances in research about their closed-loop control system[J]. Mechanical Science and Technology, 2004, 23(9):1085-1089(in Chinese).

[1]	孙华杰 , 石世宏 , 石拓 , 傅戈雁 , 陈磊 . 基于彩色CCD的激光熔覆熔池温度闭环控制研究. 激光技术, 2018, 42(6): 745-750. doi: 10.7510/jgjs.issn.1001-3806.2018.06.004
[2]	郭陆灯 , 赵长明 , 王云石 . 高效率激光无线能量传输系统闭环控制研究. 激光技术, 2021, 45(5): 576-584. doi: 10.7510/jgjs.issn.1001-3806.2021.05.007
[3]	李俊辉 , 任维彬 , 任玉中 , 雷卫宁 . 钛合金部件激光再制造材料与工艺研究进展. 激光技术, 2023, 47(3): 353-359. doi: 10.7510/jgjs.issn.1001-3806.2023.03.011
[4]	唐代明 , 苟淑云 , 王军 . 低合金相变诱发塑性(TRIP)钢激光焊接的研究进展. 激光技术, 2012, 36(2): 145-150,178. doi: 10.3969/j.issn.1001-3806.2012.02.001
[5]	张昌春 , 石岩 . 激光熔覆高厚度涂层技术研究现状及发展趋势. 激光技术, 2011, 35(4): 448-452. doi: 10.3969/j.issn.1001-3806.2011.04.004
[6]	陈传忠 , 王佃刚 , 边洁 . 激光法制备纳米粉体的研究现状. 激光技术, 2003, 27(1): 68-70.
[7]	殷苏民 , 唐通鸣 , 胡昌龄 , 张永康 . 激光加工中闭环控制技术的发展动态. 激光技术, 1999, 23(5): 319-323.
[8]	陈传忠 , 姚书山 , 包全合 , 张亮 , 雷廷权 . 脉冲激光沉积羟基磷灰石薄膜的研究现状. 激光技术, 2004, 28(1): 74-77.
[9]	陈思培 , 邝能俊 , 林明辉 , 李正佳 . 连续YAG固体激光器电源的计算机闭环控制. 激光技术, 1996, 20(1): 58-61.
[10]	鲁耀钟 , 雷卫宁 , 任维彬 , 徐杰 . K418合金叶片激光再制造Inconel718覆层匹配与强化. 激光技术, 2020, 44(1): 54-60. doi: 10.7510/jgjs.issn.1001-3806.2020.01.010
[11]	徐一帆 , 施阳杰 , 邵景珍 , 林颖 , 沈启辉 , 梁勖 . 大功率半导体激光器的高精度脉冲电源设计. 激光技术, 2023, 47(1): 108-114. doi: 10.7510/jgjs.issn.1001-3806.2023.01.017
[12]	陈传忠 , 包全合 , 姚书山 , 雷廷权 . 脉冲激光沉积技术及其应用. 激光技术, 2003, 27(5): 443-446.
[13]	郝晓剑 , 刘亭剑 . 基于快速激光恒温区的热电偶时间常数的测量. 激光技术, 2019, 43(6): 784-788. doi: 10.7510/jgjs.issn.1001-3806.2019.06.010
[14]	周益军 , 张永康 , 周建忠 , 史建国 . 激光诱发板材热应力成形技术及其研究现状. 激光技术, 2006, 30(4): 425-428.
[15]	蒋志伟 , 龚时华 , 王启行 . 双光束激光双路焊接的跟踪控制技术研究. 激光技术, 2013, 37(1): 1-5. doi: 10.7510/jgjs.issn.1001-3806.2013.01.001
[16]	杨波 , 袁义邦 , 杨建明 . 五轴联动与激光近净成形的混合制造技术研究. 激光技术, 2022, 46(3): 415-421. doi: 10.7510/jgjs.issn.1001-3806.2022.03.019
[17]	王平江 , 吴浩 , 陈吉红 , 唐小琦 . 动光式激光切割无缝拼接技术的研究与应用. 激光技术, 2009, 33(4): 369-373. doi: 10.3969/j.issn.1001-3806.2009.04.010
[18]	王忠凯 , 毕建民 , 周昕 , 陈建国 , 陈涌 , 杨泽后 , 孙鹏 . 激光多普勒双光束横向测速技术研究. 激光技术, 2006, 30(2): 183-185.
[19]	李洪敏 , 左军卫 , 徐健 , 徐一汀 , 彭钦军 , 许祖彦 . 脉冲激光的非相干合成技术研究. 激光技术, 2015, 39(2): 237-241. doi: 10.7510/jgjs.issn.1001-3806.2015.02.020
[20]	李策 , 赵培娥 , 彭涛 , 冯力天 , 周杰 , 罗雄 , 周鼎富 . 3维激光测风雷达技术研究. 激光技术, 2017, 41(5): 703-707. doi: 10.7510/jgjs.issn.1001-3806.2017.05.017

点击查看大图

计量

文章访问数: 6301
HTML全文浏览量: 3655
PDF下载量: 664
被引次数: 0

姓名
邮箱
手机号码
标题
留言内容
验证码

留言板

激光再制造闭环控制系统的研究现状及发展

作者简介: 任维彬(1983-),男,博士研究生,现主要从事激光再制造形状控制方面的研究。.

通讯作者: 董世运, syd422@sohu.com ;

Research advance and development of laser remanufacture closed-loop control systems

Corresponding author: DONG Shiyun, syd422@sohu.com ;

计量

激光再制造闭环控制系统的研究现状及发展

通讯作者: 董世运, syd422@sohu.com;

作者简介: 任维彬(1983-),男,博士研究生,现主要从事激光再制造形状控制方面的研究。

English Abstract

Research advance and development of laser remanufacture closed-loop control systems

Corresponding author: DONG Shiyun, syd422@sohu.com

全文HTML

目录

留言板

激光再制造闭环控制系统的研究现状及发展

作者简介: 任维彬(1983-),男,博士研究生,现主要从事激光再制造形状控制方面的研究。.

通讯作者: 董世运, syd422@sohu.com ;

Research advance and development of laser remanufacture closed-loop control systems

Corresponding author: DONG Shiyun, syd422@sohu.com ;

计量

出版历程

激光再制造闭环控制系统的研究现状及发展

通讯作者: 董世运, syd422@sohu.com;

作者简介: 任维彬(1983-),男,博士研究生,现主要从事激光再制造形状控制方面的研究。

English Abstract

Research advance and development of laser remanufacture closed-loop control systems

Corresponding author: DONG Shiyun, syd422@sohu.com

全文HTML

目录