光内送粉喷头空间变姿态粉气流场数值模拟

姜付兵; 石世宏; 傅戈雁

doi:10.7510/jgjs.issn.1001-3806.2015.02.001

光内送粉喷头空间变姿态粉气流场数值模拟

1.
苏州大学机电工程学院, 苏州 215021

作者简介: 姜付兵(1990-),男,硕士研究生,主要从事激光熔覆再制造方面的研究。.

通讯作者: 石世宏, shishihong@suda.edu.cn ;

基金项目:
江苏省科技支撑计划重点资助项目(BE2012068);江苏省自然科学基金资助项目(BK2012183)
中图分类号: TG156.99;TN249

Numerical simulation of powder-gas flow field of inside-beam powder feeding nozzle with changing attitude

1.
School of Mechanical and Electric Engineering, Soochow University, Suzhou 215021, China

Corresponding author: SHI Shihong, shishihong@suda.edu.cn ;

CLC number: TG156.99;TN249

摘要: 光内送粉喷头是一种新型的激光熔覆同轴送粉喷头,具有空心光束、单根粉束指向性好、无干涉、光粉气一体同轴等优势。为了分析喷头倾斜角度和外层准直气流速对粉束汇聚特性的影响,采用FLUENT软件进行模拟计算,对喷头在空间变姿态作业过程中单喷嘴出口粉束的汇聚特性进行了理论分析和实验验证。结果表明,喷嘴出口粉末质量浓度分布沿x方向服从高斯分布,对称轴上沿-y方向质量浓度先基本保持恒定,后逐渐下降为0kg/m3;随喷头倾斜角度的增大,粉末汇聚长度h不断减小,h变化范围为11mm~17mm,偏移量Δx大致呈增大趋势,Δx变化范围为0.0mm~0.4mm;随外层准直气速度增加,汇聚长度h呈轻微上升趋势,h上升幅度为1mm~2mm,而偏移量Δx在不同倾斜角度范围内呈现出不同变化趋势,Δx变化幅度为0.05mm~0.15mm;实验数据与模拟结果变化趋势基本吻合。所建模型和模拟结果对于选择和优化实验工艺参量具有参考价值。
- 激光技术 /
- 气固两相流 /
- 数值模拟 /
- 光内同轴送粉
Abstract: Inside-beam powder feeding nozzle is a new laser cladding coaxial powder feeding nozzle, which has the advantages of hollow beam, good directivity, no interference and co-axis of light, powder and gas. In order to analyze the influence of nozzle's inclination angle and outer collimating gas velocity on the focusing characteristics of powder, FLUENT software was used for numerical simulation. The focusing characteristics of powder out of a single nozzle with changing attitude were analyzed in theory and verified in experiments. The results show that mass concentration distribution of powder nozzle is consistent with Gaussian distribution along the x direction and it remains constant firstly and then decreases to zero gradually along the -y direction of the symmetry axis. When the inclination angle of the head increases, the powder focusing length h decreases in the range of 11mm~17mm and the deviation Δx increases in the range of 0.0mm~0.4mm substantially. When the outer collimating gas velocity increases, the powder focusing length h increases slightly in the range of 1mm~2mm and the deviation Δx presents different trend in the range of 0.05mm~0.15mm. The experimental data and simulation results are basically consistent. The built model and the simulation results have reference value for the selection and optimization of experimental parameters.
- laser technique /
- gas-solid two-phase flow /
- numerical simulation /
- inside-beam coaxial powder feeding

[1]	YANG S, ZHONG M L, ZHANG Q M, et al. Directly rapid fabrication of metal components by laser cladding[J]. Powder Metallurgy Technology, 2002,20(4):234-238(in Chinese).
[2]	JEHNMING L. Numerical simulation of the focused powder streams in coaxial laser cladding[J]. Journal of Materials Processing Technology, 2000,105(1):17-23.
[3]	ZEKOVIC S, DWIVEDI R, KOVACEVIC R. Numerical simulation and experimental investigation of gas flow from radially symmetrical nozzles in laser-based direct metal deposition[J]. International Journal of Machine Tool & Manufacture, 2007,47(1):112-123.
[4]	YANG X Ch, LEI J B, LIU Y W, et al. Experimental measurement of metal powder stream concentration field in laser manufacturing[J]. Chinese Journal of Lasers, 2006,33(7):993-997(in Chinese).
[5]	ZHANG A F, ZHOU Zh M, LI D Ch, et al. Numerical simulation of gas-solid two-phase flow field on coaxial powder nozzle in laser metal direct manufacturing[J]. Journal of Xi'an Jiaotong University, 2008,42(9):1169-1173(in Chinese).
[6]	ZHU G X, LI D Ch, ZHANG A F, et al. Influence of deposited layer's structure on flow field of coaxial powder feeding nozzle[J]. Chinese Journal of Lasers, 2010,37(6):1636-1642(in Chinese).
[7]	SHI Sh H, FU G Y. Forming the inside-laser coaxial powder feeding laser cladding and inside-laser coaxial powder feeding nozzle: China, 200610116413.1[P].2006-09-22(in Chinese).
[8]	FU G Y. A coaxial delivery device of light, powder and gas for laser cladding manufacturing: China, 201020022781.1[P]. 2010-09-08(in Chinese).
[9]	WANG F J. Computational fluid dynamics analysis-principles and application of CFD software[M]. Beijing: Tsinghua University Press,2004:62-89(in Chinese).
[10]	LAUNDER B, SPALDING D. Lectures in mathematical models of turbulence[M]. London, UK:Academic Press,1972:49-57.

[1]	韦俊尤 , 胡晓冬 , 姚建华 . 激光熔覆沸腾式送粉器气固两相流数值模拟研究. 激光技术, 2012, 36(6): 719-723. doi: 10.3969/j.issn.1001-3806.2012.06.002
[2]	孟伟栋 , 石世宏 , 傅戈雁 , 王涛 , 杨轼 , 史建军 . 光内同轴送粉立面堆积成形实验研究. 激光技术, 2015, 39(5): 594-597. doi: 10.7510/jgjs.issn.1001-3806.2015.05.003
[3]	盛德仁 . 激光角散射诊断气固两相流粒度及浓度的研究. 激光技术, 2000, 24(3): 163-166.
[4]	雷定中 , 石世宏 , 傅戈雁 . 激光宽带熔覆光内送粉喷嘴准直气罩研制. 激光技术, 2015, 39(5): 590-593. doi: 10.7510/jgjs.issn.1001-3806.2015.05.002
[5]	刘顺洪 , 吉巧杰 , 扬晶 . 钢管激光弯曲成形的数值模拟. 激光技术, 2006, 30(4): 355-359.
[6]	刘子昂 , 石伟 , 汪诚 . 激光冲击强化残余应力的数值模拟研究. 激光技术, 2017, 41(1): 1-5. doi: 10.7510/jgjs.issn.1001-3806.2017.01.001
[7]	杨洪亮 , 金湘中 , 修腾飞 , 费鑫江 , 叶颖 . 钢/铝异种金属光纤激光焊接数值模拟. 激光技术, 2016, 40(4): 606-609. doi: 10.7510/jgjs.issn.1001-3806.2016.04.031
[8]	李晓锋 , 周昕 , 卢熙 , 伍波 , 杨泽后 , 陈涌 , 周鼎富 , 侯天晋 . 激光在烟雾中传输特性的数值模拟分析. 激光技术, 2010, 34(3): 381-384. doi: 10.3969/j.issn.1001-3806.2010.03.027
[9]	汪建敏 , 周群立 , 姜银方 , 张梦蕾 , 程科升 , 万里 , 赵龑 . 中空激光冲击金属板料变形的数值模拟. 激光技术, 2012, 36(6): 727-730. doi: 10.3969/j.issn.1001-3806.2012.06.004
[10]	许伯强 , 刘洪凯 , 徐桂东 , 徐晨光 , 李俊敏 . 基于应力-位移混合有限元法的激光超声数值模拟. 激光技术, 2014, 38(2): 230-235. doi: 10.7510/jgjs.issn.1001-3806.2014.02.018
[11]	高立 , 张永康 . 镍-钴合金杆料激光冲击强化的实验和数值模拟. 激光技术, 2006, 30(5): 507-510.
[12]	陈根余 , 陈晓锋 , 周聪 , 李时春 , 廖生慧 . 激光深熔焊细长小孔数值模拟与试验研究. 激光技术, 2015, 39(2): 170-175. doi: 10.7510/jgjs.issn.1001-3806.2015.02.005
[13]	李贝贝 , 李小将 . 激光输能光电池温度场数值模拟. 激光技术, 2017, 41(4): 537-544. doi: 10.7510/jgjs.issn.1001-3806.2017.04.016
[14]	王琪琪 , 任乃飞 , 任旭东 . GH4037镍基高温合金激光打孔相变过程数值模拟. 激光技术, 2018, 42(6): 764-768. doi: 10.7510/jgjs.issn.1001-3806.2018.06.007
[15]	王霄 , 陈怡星 , 刘会霞 , 刘长京 , 丁国民 . 激光微造型中烧蚀热场及弹坑的数值模拟. 激光技术, 2007, 31(6): 565-567,580.
[16]	龙日升 , 刘伟军 , 尚晓峰 . 激光金属沉积成形过程中温度场的数值模拟. 激光技术, 2007, 31(4): 394-396,430.
[17]	花银群 , 蔡峥嵘 , 陈瑞芳 , 姜辉 , 吉光 . TC4钛合金激光搭接冲击强化的实验和数值模拟. 激光技术, 2010, 34(5): 632-635,639. doi: 10.3969/j.issn.1001-3806.2010.O5.015
[18]	代保江 , 陈烽 , 张东石 , 杜广庆 , 孟祥卫 . 飞秒激光制备波导型光合波器的数值模拟. 激光技术, 2012, 36(2): 251-254,264. doi: 10.3969/j.issn.1001-3806.2012.02.029
[19]	陆靖 , 孙文磊 , 陈子豪 , 邢学峰 , 杨凯欣 , 周浩南 , 刘德明 . 热作模具表面激光熔覆H13的数值模拟及实验研究. 激光技术, 2023, 47(4): 558-564. doi: 10.7510/jgjs.issn.1001-3806.2023.04.018
[20]	袁红 , 童慧峰 , 李牧 , 孙承纬 . 强激光加载真空中铝靶冲量耦合的数值模拟. 激光技术, 2012, 36(4): 520-523. doi: 10.3969/j.issn.1001-806.2012.04.021

点击查看大图

计量

文章访问数: 2905
HTML全文浏览量: 661
PDF下载量: 630
被引次数: 0

姓名
邮箱
手机号码
标题
留言内容
验证码

留言板

光内送粉喷头空间变姿态粉气流场数值模拟

作者简介: 姜付兵(1990-),男,硕士研究生,主要从事激光熔覆再制造方面的研究。.

通讯作者: 石世宏, shishihong@suda.edu.cn ;

Numerical simulation of powder-gas flow field of inside-beam powder feeding nozzle with changing attitude

Corresponding author: SHI Shihong, shishihong@suda.edu.cn ;

计量

光内送粉喷头空间变姿态粉气流场数值模拟

通讯作者: 石世宏, shishihong@suda.edu.cn;

作者简介: 姜付兵(1990-),男,硕士研究生,主要从事激光熔覆再制造方面的研究。

English Abstract

Numerical simulation of powder-gas flow field of inside-beam powder feeding nozzle with changing attitude

Corresponding author: SHI Shihong, shishihong@suda.edu.cn

全文HTML

目录

留言板

光内送粉喷头空间变姿态粉气流场数值模拟

作者简介: 姜付兵(1990-),男,硕士研究生,主要从事激光熔覆再制造方面的研究。.

通讯作者: 石世宏, shishihong@suda.edu.cn ;

Numerical simulation of powder-gas flow field of inside-beam powder feeding nozzle with changing attitude

Corresponding author: SHI Shihong, shishihong@suda.edu.cn ;

计量

出版历程

光内送粉喷头空间变姿态粉气流场数值模拟

通讯作者: 石世宏, shishihong@suda.edu.cn;

作者简介: 姜付兵(1990-),男,硕士研究生,主要从事激光熔覆再制造方面的研究。

English Abstract

Numerical simulation of powder-gas flow field of inside-beam powder feeding nozzle with changing attitude

Corresponding author: SHI Shihong, shishihong@suda.edu.cn

全文HTML

目录