不同WC含量下WC/Cu复合材料弹性模量实验研究

俞海; 郭荣鑫; 夏海廷; 颜峰; 张玉波

doi:10.7510/jgjs.issn.1001-3806.2013.02.001

不同WC含量下WC/Cu复合材料弹性模量实验研究

1.
昆明理工大学工程力学系, 昆明 650500;
2.
昆明理工大学云南省先进材料力学行为与微观结构设计高校重点实验室, 昆明 650500

作者简介: 俞海(1986- ),男,硕士研究生,主要从事光测实验力学的研究。.

通讯作者: 郭荣鑫, guorx@kmust.edu.cn ;

基金项目:
云南省应用基础研究计划资助项目(2011FB029);高等学校博士学科点专项科研基金资助项目(20105314110006);云南省教育厅科学研究基金资助项目(2010Y385)
中图分类号: O348.1

Experimental study on the elastic modulus of WC/Cu composite material with different WC content

1.
Department of Engineering Mechanics, Kunming University of Science and Technology, Kunming 650500, China;
2.
Key Laboratory of Yunnan Higher Education Institutes for Mechanical Behavior and Microstructure Design of Advanced Materials, Kunming University of Science and Technology, Kunming 650500, China

Corresponding author: GUO Rong-xin, guorx@kmust.edu.cn ;

CLC number: O348.1

摘要: 为了研究数字图像相关方法运用于小试样下WC/Cu复合材料弹性模量测定的准确性,采用粉末冶金法制备出了WC含量不同的WC/Cu复合材料,对试件表面用白漆配合碳粉方法进行制斑,并在万能材料试验机上进行拉伸实验,用CCD相机记录其散斑图。对记录的散斑图进行相关运算,并通过畸变校正理论校正位移计算结果,计算出小应变范围内WC/Cu复合材料的应力应变曲线,得到弹性模量;与传统电测方法结果进行对比,数据吻合较好。结果表明,采用数字图像相关方法和小试件制斑方法运用于WC/Cu复合材料弹性模量的测定是较为精确可靠的。
- 激光技术 /
- 图像处理 /
- 弹性模量 /
- 数字图像相关 /
- WC/Cu复合材料 /
- 梯度法
Abstract: In order to study the accuracy of determination for elastic modulus of WC/Cu composites by digital image correlation method, WC/Cu composites with different WC content were prepared by powder metallurgy method. On the surface of specimens speckles were made by white paint with carbon powder. The tensile tests of these specimens were made in the universal material testing machine. Meanwhile the speckle figures were recorded by CCD camera. Correlation calculation was performed for the recorded speckle figures. And the calculation results were corrected according to the distortion correction theory. Then the stress-strain curve and elastic modulus of WC/Cu composites under small strain were given. The experimental results are in accordance with the results got by traditional electrical measurement. That means the measurement of elastic modulus of WC/Cu composites by digital image correlation applied to the small samples is correct and reliable.
- laser technique /
- image processing /
- elastic modulus /
- digital image correlation /
- WC/Cu composites /
- gradient method

[1]	PENG J C,GUO R X,XIA H T. Effect of Cu／WC functionally graded materials microstructure on its properties[J].Science Technology and Engineering,2010,10(12):1-2(in Chinese).
[2]	WANG M J,LOU Y,ZHANG H, et al.A study of aluminium oxide dispersion strengthened copper electrodes [J].Mining and Metallurgical Engineering,2001,22(4):48-51(in Chinese).
[3]	HU B,HE L F,ZHANG R. Digital image correlation method for rubber elastic modulus measurement [J].Journal of Experimental Mechanics,2011,26(2):3(in Chinese).
[4]	ZHANG R,HE L F. Elastic modulus measurement of strand wi-re using digital image correlation [J].Journal of North University of China(Natural Science Edition),2010,31(4):409-413(in Chinese).
[5]	PAN B,XU B Q,LI K J. Performance of gradient operators in al-gorithm of gradient-based subpixel registration[J].Optical Techniq-ue,2005,31(1):26-31(in Chinese).
[6]	PAN B,XIE H M,DAI F L. An investigation of sub-pixel displa-cements registration algorithms in digital image correlation [J].Chinese Journal of Theoretical and Applied Mechanics,2007,39(2):245-252(in Chinese).
[7]	GUO R X, CAI G C,MA K,et al. A comparative study on the subpixel displacement calculation methods used in digital speckle measurement [J].Laser Journal,2005,25(5):2-3(in Chinese).
[8]	WU W P. Sub-pixel displacement algorithm and the experimental research of image correlation technology. Wuhan: Huazhong University of Science and Technology,2009:24-28(in Chinese).
[9]	PU Z L,CHU J C,MAO X P. Summarization on preparation for particle reinforced metal matrix composites [J].Modern Electric Power,2002,19(6):2-4(in Chinese).
[10]	LUO P F,CHAO Y J,SUTTON M A, et al. Accurate measurement of three-dimensional displacement in deformable bodies using computer vision[J].Experimental Mechanics,1993,33(2):123-132.
[11]	PAN B,XIE H M CHEN P W, et al. Assessment and correction of lens distortion for digital image correlation [J].Acta Metrologica Sinca,2009,30(1):62-67(in Chinese).
[12]	SU X H,ZHAO J G,ZHANG H X. Research on distortion of CCD camera[J].Physics Experimentation,2003,23(9):39-41(in Chinese).

[1]	俞海 , 郭荣鑫 , 夏海廷 , 颜峰 , 张玉波 , 何天淳 . 数字梯度敏感法在静态断裂力学实验中的应用. 激光技术, 2014, 38(5): 627-631. doi: 10.7510/jgjs.issn.1001-3806.2014.05.011
[2]	刘禹 , 肖世德 , 张睿 , 张若凌 , 张磊 . 基于遗传算法的数字图像相关变形初值估计. 激光技术, 2020, 44(1): 130-135. doi: 10.7510/jgjs.issn.1001-3806.2020.01.023
[3]	俞海 , 刘云鹏 , 郭荣鑫 , 夏海廷 , 颜峰 . 数字图像相关法散斑图质量评价方法. 激光技术, 2020, 44(2): 237-243. doi: 10.7510/jgjs.issn.1001-3806.2020.02.018
[4]	李文龙 , 戈海龙 , 任远 , 成巍 . 图像处理技术在激光熔池温度检测的应用. 激光技术, 2018, 42(5): 599-604. doi: 10.7510/jgjs.issn.1001-3806.2018.05.004
[5]	张海庄 , 姚梅 , 雷萍 , 李鹏 , 曾庆平 . 远场激光光斑图像处理方法研究. 激光技术, 2013, 37(4): 460-463. doi: 10.7510/jgjs.issn.1001-3806.2013.04.010
[6]	汤敏 , 王惠南 . 激光扫描共聚焦显微镜图像的计算机处理. 激光技术, 2007, 31(5): 558-560.
[7]	冯煦 , 张瑞瑛 , 周萍 , 李松 . 大功率半导体线激光图像处理方法研究. 激光技术, 2010, 34(5): 624-627. doi: 10.3969/j.issn.1001-3806.2010.O5.013
[8]	苏平 , 牛燕雄 , 李大乾 , 牛海莎 , 李易难 , 张超 . 基于面阵CCD的激光告警系统的图像采集与处理. 激光技术, 2013, 37(3): 394-399. doi: 10.7510/jgjs.issn.1001-3806.2013.03.028
[9]	王春娴 , 李会山 , 王风忠 . 基于图像的激光熔覆粉末粒子运动行为分析. 激光技术, 2010, 34(3): 300-302,319. doi: 10.3969/j.issn.1001-3806.2010.03.004
[10]	周慧 , 段一萍 , 王锦鹏 . 靶场光测数字图像无损压缩技术方案设计. 激光技术, 2008, 32(2): 222-224.
[11]	吴超 , 王寿松 . 基于轨迹图像的雾滴颗粒运动速度光电测量方法. 激光技术, 2014, 38(2): 214-217. doi: 10.7510/jgjs.issn.1001-3806.2014.02.015
[12]	张宝华 , 刘鹤 . 基于能量梯度场映射关系的红外图像分割方法. 激光技术, 2015, 39(1): 76-81. doi: 10.7510/jgjs.issn.1001-3806.2015.01.015
[13]	郭佑东 , 凌福日 , 姚建铨 . 基于梯度变换的太赫兹图像超分辨率重建. 激光技术, 2020, 44(3): 271-277. doi: 10.7510/jgjs.issn.1001-3806.2020.03.001
[14]	吴家洲 , 刘君 , 施佳文 , 张胜 . 激光焊缝图像分割与颜色识别方法研究. 激光技术, 2023, 47(5): 723-728. doi: 10.7510/jgjs.issn.1001-3806.2023.05.022
[15]	张怡霄 , 杜惊雷 , 高福华 , 姚军 , 曾阳素 , 郭永康 . 分数域啁啾滤波及其在数字图像处理中的应用. 激光技术, 2003, 27(1): 78-80.
[16]	邓晓鹏 , 文伟 . 基于干涉的二值图像逻辑运算加密技术. 激光技术, 2010, 34(3): 401-404. doi: 10.3969/j.issn.1001-3806.2010.03.033
[17]	谢军昱 , 许杨剑 , 王效贵 . 基于贝叶斯模型和数字图像相关的视觉测量. 激光技术, 2016, 40(6): 866-870. doi: 10.7510/jgjs.issn.1001-3806.2016.06.019
[18]	崔治 , 邓曙光 , 肖卫初 . 利用HSSIM和残差比阈值的3维激光扫描图像去噪. 激光技术, 2015, 39(5): 669-673. doi: 10.7510/jgjs.issn.1001-3806.2015.05.018
[19]	张羽鹏 , 王开福 . LabVIEW和MATLAB在电子散斑干涉图像处理中的应用. 激光技术, 2009, 33(6): 582-585,589. doi: 10.3969/j.issn.1001-3806.2009.06.007
[20]	顾国庆 , 王开福 , 燕新九 . 基于同态滤波的电子散斑干涉图像处理. 激光技术, 2010, 34(6): 750-752,797. doi: 10.3969/j.issn.1001-3806.2010.06.009

点击查看大图

计量

文章访问数: 3526
HTML全文浏览量: 825
PDF下载量: 589
被引次数: 0

姓名
邮箱
手机号码
标题
留言内容
验证码

留言板

不同WC含量下WC/Cu复合材料弹性模量实验研究

作者简介: 俞海(1986- ),男,硕士研究生,主要从事光测实验力学的研究。.

通讯作者: 郭荣鑫, guorx@kmust.edu.cn ;

Experimental study on the elastic modulus of WC/Cu composite material with different WC content

Corresponding author: GUO Rong-xin, guorx@kmust.edu.cn ;

计量

不同WC含量下WC/Cu复合材料弹性模量实验研究

通讯作者: 郭荣鑫, guorx@kmust.edu.cn;

作者简介: 俞海(1986- ),男,硕士研究生,主要从事光测实验力学的研究。

English Abstract

Experimental study on the elastic modulus of WC/Cu composite material with different WC content

Corresponding author: GUO Rong-xin, guorx@kmust.edu.cn

全文HTML

目录

留言板

不同WC含量下WC/Cu复合材料弹性模量实验研究

作者简介: 俞海(1986- ),男,硕士研究生,主要从事光测实验力学的研究。.

通讯作者: 郭荣鑫, guorx@kmust.edu.cn ;

Experimental study on the elastic modulus of WC/Cu composite material with different WC content

Corresponding author: GUO Rong-xin, guorx@kmust.edu.cn ;

计量

出版历程

不同WC含量下WC/Cu复合材料弹性模量实验研究

通讯作者: 郭荣鑫, guorx@kmust.edu.cn;

作者简介: 俞海(1986- ),男,硕士研究生,主要从事光测实验力学的研究。

English Abstract

Experimental study on the elastic modulus of WC/Cu composite material with different WC content

Corresponding author: GUO Rong-xin, guorx@kmust.edu.cn

全文HTML

目录