[1] SHEN Z C,KONG W J,SONG Y X,et al.The optimum design and preparation of ZrO2/SiO2 polarizing film[J].Laser Technology,2005,29(1):101-103 (in Chinese).
[2] HIROSE T,FOKINE M,SAITO K.Waveguide writing by CO2 laser annealing on sputtered silica film[J].Journal of Non-Crystalline Solids,2006,352(6/7):664 -668.
[3] LIANG Q L,ZHAO G Y,LU J G.Synthesis and fine patterning of organic-inorganic composite SiO2-Al2O3 thick films[J].Applied Surface Science,2007,253(12):5442-5446.
[4] HUANG J F.Principle and technology of sol-gel[M].Beijing:Chemical Industry Press,2005:116(in Chinese).
[5] TAYLOR D J,FABES B D.Laser processing of sol-gel coatings[J].Journal of Non-Crystalline Solids,1992,147(48):457-462.
[6] GUGLIELMI M,COLOMBO P,MANCINELLI DEGLI ESPOSTI L,etal.Characterization of laser-densified sol-gel films for the fabrication of planar and strip optical waveguides[J].Journal of Non-Crystalline Solids,1992,147/148(1/2):641-645.
[7] PELLI S,RIGHINI G C,SCAGLIONE A,et al.Direct laser writing of ridge optical waveguides in silica-titania glass sol-gel films[J].Optical Materials,1996,5(1/2):119-126.
[8] ZHAI J W,ZHANG L Y,YAO X,et al.Characteristics of laser-densi-fied and conventionally heat treated sol-gel derived silica-titania films[J].Surface and Coatings Technology,2001,138 (2/3):135-140.
[9] LI X Y,LI H L,LIU J W,et al.Conductive line preparation on resin surfaces by laser micro-cladding conductive pastes[J].Applied Surface Science,2004,233 (1/4):51-57.
[10] ZHAI J W,ZHANG L Y,YAO X.The etched capacity for sol-gel de-rived silica-titania composited films[J].Jounal of Inorganic Materials,1999,14(1):133-137.
[11] REED G T,KNIGHTS A P.Silicon photonics[M].West Sussex:John Wiley & Sons,2004:71.