[1] LIU L, LI D B, TONG Y F, et al. Laser processing technology and research progress of vascular stent [J]. Hot Working Technology, 2017, 46(5):15-18(in Chinese).
[2] MENG H Y, LIAO J H, GUAN B G, et al.Fiber laser cutting technology on coronary artery stent[J]. Chinese Journal of Lasers, 2007, 34(5):733-736(in Chinese).
[3] CHEN Zh, WANG J L, LI Y T, et al.Preparation of coronary stent with 316L stainless steel seamless thin-wall tube[J]. Heat Treatment of Metals, 2008, 33(2):76-78(in Chinese).
[4] FAN W, GAO F, XIE J F.Study on laser fine cutting process of stainless coronary stent[J].Materials Reviews, 2012, 26(22):27-30(in Chinese).
[5] ZHANG Y Zh, ZHANG Ch, LI J, et al.Formation mechanism of recast layer in millisecond laser drilling of Ti6AlV alloys[J].Acta Optica Sinica, 2017, 37(2):144-153(in Chinese).
[6] FU C H, LIU J F, GUO A. Statistical characteristics of surface integrity by fiber laser cutting of Nitinol vascular stents[J]. Applied Surface Science, 2015, 353:291-299. doi: 10.1016/j.apsusc.2015.06.105
[7] MUHAMMAD N, WHITEHEAD D, BOOR A, et al. Picosecond laser micromachining of nitinol and platinum-iridium alloy for coronary stent applications[J]. Applied Physics, 2012, A106(3):607-617.
[8] YANG H, HUANG Sh, DUAN J, et al.Contrastive study on laser ablation of single-crystal silicon by 1030nm femtosecond laser and 355nm nanosecond laser[J].Chinese Journal of Lasers, 2013, 40(1):0103003(in Chinese). doi: 10.3788/CJL
[9] YAO Zh Q, HU Y X. Direct fabrication of sub-micron sized mirco-structure by interfering nanosecond laser beams[J].Journal of Mechanical Engineering, 2013, 49(6):122-128(in Chinese). doi: 10.3901/JME.2013.06.122
[10] ZHOU X, DUAN J, CHEN H, et al.Experimental study about water-assisted laser drill on Al2O3 ceramics without recast layer[J].Laser Technology, 2018, 42(2):271-275(in Chinese).
[11] ZHOU Y H, LIAO J H, MENG H Y, et al.Laser micro-fabrication of endovascular stent[J].Applied Laser, 2005, 25(3):161-164(in Chinese).
[12] HUANG Ch B, AO N J.Novel biodegradable coronary stents: design and laser microprocessing[J].Applied Laser, 2007, 27(3):224-227(in Chinese).
[13] WANG, K D, DUAN W Q, MEI X S, et al.Processing of micro-hole by millisecond laser and post processing of recast layer[J].Journal of Xi'an Jiaotong University, 2011, 45(7):45-49(in Chinese).
[14] HOCK K, ADELMANN B, HELLMANN R. Comparative study of remote fiber laser and water-jet guided laser cutting of thin metal sheets[J]. Physics Procedia, 2012, 39:225-231. doi: 10.1016/j.phpro.2012.10.033
[15] JIANG M H, ZHAI L B, CHEN J M.Experimental study on laser micro cutting cobalt chromium tube[J].Journal of Microfabrication Technology, 2008(4):27-31(in Chinese).
[16] CHENG P, WEI D, WU B K, et al.Laser micro-fabrication of endovascular stent[J].Optics and Precision Engineering, 2014, 22(1):63-68(in Chinese). doi: 10.3788/OPE.
[17] MUHAMMAD N, LI L.Underwater femtosecond laser micromachining of thin nitinol tubes for medical coronary stent manufacture[J].Applied Physics, 2012, A107(4):849-861.
[18] LI C, JOHNSON D, KOVACEVIC R. Modeling of waterjet guided laser grooving of silicon[J]. International Journal of Machine Tools & Manufacture, 2003, 43(9):925-936.
[19] ZHANG X B. Laser drilling with 100ns~700ns YAG laser in Nickel-based alloy[J]. Applied Laser, 2005, 25(2):90-92(in Chinese).
[20] LI C, NIKUMB S, WONG F. An optimal process of femtosecond laser cutting of NiTi shape memory alloy for fabrication of miniature devices[J]. Optics and Lasers in Engineering, 2005, 44(10):1078-1087.
[21] MANLEY J, HOUSH R, WAGNER F, et al. Water-guided lasers create clean cuts[J]. Laser Focus World, 2004, 40(5):15-18.