[1] LEI Zh L, LI Y, CHEN Y B, et al. Effect of process parameters on porosity formation ratio in dual-beam laser welding of aluminum alloys with filler wire[J]. Transactions of the China Welding Institution, 2013, 34(2): 40-44(in Chinese).
[2] SUI Sh X, YU Y L, FEI W, et al. Research of characteristics of weld formation of aluminum alloy by high power fiber laser welding[J]. Laser Technology, 2017, 41(3): 322-327(in Chinese).
[3] WANG X H, GU X Y, SUN D Q. Reserach on interface characteristic of laser welding joints of steel/aluminum dissimilar materials[J]. Journal of Mechanical Engineering, 2017, 53(4): 26-33(in Chinese). doi: 10.3901/JME.2017.04.026
[4] MIAO H, SHAN X, ZHANG R H, et al. Properties of vacuun plate glass for sealing[J]. Journal of Functional Materials, 2014, 45(21): 21094-21097(in Chinese).
[5] LIU T T, XU H F, HAN C L, et al. Research and industrialization development of vacuum glazing[J]. Bulletin of the Chinese Ceramic Society, 2013, 32(2): 268-273(in Chinese).
[6] OCHOA C E, ARIES M B C, LOENEN E J V, et al. Considerations on design optimization criteria for windows providing low energy consumption and high visual comfort[J]. Applied Energy, 2012, 95(2):238-245.
[7] MIAO H, ZUO D W, ZHANG R H, et al. Study of shore stress of vacuum plate glazing at the atmospheric pressure[J]. Journal of Building Materials, 2008, 11(6): 757-761(in Chinese).
[8] KIND H, GEHLEN E, ADEN M, et al. Laser glass frit sealing for encapsulation of vacuum insulation glasses [J]. Physics Procedia, 2014, 56:673-680. doi: 10.1016/j.phpro.2014.08.075
[9] MEMON S, FARUKH F, EAMES P C, et al. A new low-temperature hermetic composite edge seal for thefabrication of triple vacuum glazing[J]. Vacuum, 2015, 120(A):73-82.
[10] LUO D W, SHEN Zh Sh. Porosity and glass sputtering in the sealing process of glass to metal[J]. Journal of University of Science and Technology Beijing, 2011, 33(7): 856-862(in Chinese).
[11] ZHOU J X, TANG X H, ZHOU Y, et al. Investigation of the porosity defect phenomenon during laser welding of power metal material[J]. Laser Technology, 2003, 27(6): 503-505(in Chinese).
[12] FANG Y, HYDE T J, ARYA F, et al. Indium alloy-sealed vacuum glazing development and context[J]. Renewable & Sustainable Energy Reviews, 2014, 37:480-501.
[13] TIAN W, ZHOU D W, QIAO X J, et al. Study on the reason of porosity formation in laser welding of magnesium and aluminun dissimilar metal[J]. Laser Technology, 2013, 37(6):825-828(in Ch-inese).
[14] XU H F, LIU X G, BAO Y W, et al. Strength and reliability analysis of edge sealing in vacuum glazing[J]. Journal of Materials Science and Engineering, 2012, 30(1):123-127(in Chinese).
[15] DÖHLER F, ZSCHECKEL T, KASCH S, et al. A glass in the CaO/MgO/Al2O3/SiO2 system for the rapid laser sealing of alumina[J]. Ceramics International, 2017, 43(5):4302-4308. doi: 10.1016/j.ceramint.2016.12.073
[16] MIAO H, SHAN X, LIU Y, et al. Sealing properties of PbO-TiO2-SiO2-RxOy system glass of vacuum glazing[J]. Transactions of Materials and Heat Treatment, 2015, 36(12): 13-18(in Chinese).
[17] MIAO H, SHAN X, ZHANG J F, et al. Effect of sealing temperature on the sealing edge performance ofvacuum glazing[J]. Vacuum, 2015, 116:7-12. doi: 10.1016/j.vacuum.2015.02.009
[18] MIAO H, XI X B, ZHANG R H, et al. Numerical calculation and experimental research on wind load of vacuum plate glass[J]. Acta Energiae Solaris Sinica, 2013, 34(11): 1888-1894(in Chinese).
[19] ZHANG J F, LIU S X, ZHANG Y J, et al. Formation mechanism of sealing edge pores for vacuum glazing using laser brazing technique[J]. Vacuum, 2017, 147:1-7.
[20] ZHU G X, ZHANG A F, LI D C. Effect of process parameters on surface smoothness in laser cladding[J]. Chinese Journal of Lasers, 2010, 37(1): 296-301(in Chinese). doi: 10.3788/JCL