[1] YNAG Zh, YANG H P, WU X Ch, et al. Friction and wear mechanism at elevated temperature of H13 steel with a duplex pack boriding treatment[J].Chinese Journal of Materials Research, 2014, 28(3):220-226(in Chinese).
[2] CHEN C J, CAO Q, ZHANG M, et al. Microstructure and wear resistance enhancement of H13 hot worked tool steel by means of laser clad NiCrBSi + WC powder[J]. Lasers in Engineering, 2012, 23(5):341-354.
[3] LEI Y W, SUN R L, TANG Y, et al. Microstructure and phase transformations in laser clad CrxSy/Ni coating on H13 steel[J]. Optics and Lasers in Engineering, 2015, 66(1):181-186.
[4] LIU S Q, GUO Y Sh, YANG Y L, et al. Investigation on orthogonal experiments of laser cladding anti-wear resistance coating on H13 steel[J]. Laser Technology, 2015, 39(3):399-404(in Chinese).
[5] HEMMATI I, OCELIK V, HOSSON J D. Dilution effects in laser cladding of Ni-Cr-B-Si-C hardfacingalloys[J].Materials Letters, 2012, 84(1):69-72.
[6] PAN H, ZHAO J F, LIU Y L, et al. Controllability research on dilution ratio of Nickel-based superalloy by laser cladding reparation[J]. Chinese Journal of Lasers, 2013, 40(4):0403007(in Chinese). doi: 10.3788/CJL
[7] LIU X B, WANG H M. The influence of processing parameters on laser cladding composite coatings on TiAl inter-metallic alloy[J]. Laser Technology, 2006, 30(1):67-69(in Chinese).
[8] JAVAD M, POUYA G, MOHAMAD H A. Experimental investigation and statistical optimization of laser surface cladding parameters[J].The International Journal of Advanced Manufacturing Technology, 2015, 76(5):1163-1172.
[9] ZHANG Y K, CUI Ch Y, XIAO R Sh, et al. Advanced laser manufacturing technology[M].Zhenjiang: Jiangsu University Press, 2011: 3, 31-67(in Chinese).
[10] XV D P, ZHOU J Zh, GUO H F, et al.Investigation of generation mechanism and controlling methodof cladding layer ranking by laser cladding. Tool Engineering, 2007, 41(4):24-27(in Chinese).
[11] HUA L, TIAN W, LIAO W H, et al.Study of thermal-mechanical coupling behavior in laser cladding[J]. Laser Optoelectronics Progress, 2014, 51(9):091401(in Chinese).
[12] WANG H Y, CUI C Y, ZHOU J.Microstructure and properties of cobalt-based alloy coating on tool steel surface prepared by laser cladding[J]. Journal of Jilin University, 2010, 40(4):1000-1004(in Chinese).
[13] ZHANG X D, DONG S Y, XU B S, et al. Microstructure and performance of Ni35 alloy laser cladding on 45 steel substrate[J].Journal of Academy of Armored Force Engineering, 2009, 23(3):73-76(in Chinese).
[14] XU P, LIN C X, ZHOU C Y, et al.Wear and corrosion resistance of laser cladding AISI 304 stainless steel/Al2O3 composite coatings[J].Surface and Coatings Technology, 2014, 238(1):9-14.
[15] LI G, LIU L, HOU J Y, et al. Study on microstructure and performance of laser cladding Ni-Zr-Nb-Al amorphous composite coating[J]. Laser Technology, 2011, 35(2):185-188(in Chinese).
[16] CHEN J F, ZHOU J Y, SUN L Y, et al. Strengthening effect and residual stress of 40Cr steel quenched with fiber laser[J]. Transactions of Materials and Heat Treatment, 2015, 36(11):95-100(in Chinese).