| [1] | XU M,HUANG H B,WANG Z L. Study on detection method of fatigue test of aircraft skin crack[J]. Structural Strength Research, 2014(2):53-56. |
| [2] | ZHEN R. Research on flexible fixture control system for processing aircraft skin[D].Harbin:Harbin Institute of Technology, 2009:16-20(in Chinese). |
| [3] | HU Y G,SUN A Q,WANG X P, et al. Research on application of aircraft skin digital manufacturing technology[J]. New Technology New Process, 2014(8):19-22(in Chinese). |
| [4] | PENG Y H, HOU H L, LI Z F, et al. Development of cutting tool for production breaks of aircraft fuselage[J]. Manufacturing Technology Machine Tool, 2014(1):103-107(in Chinese). |
| [5] | THOMAS D J. The effect of laser cutting parameters on the formability of complex phase steel[J]. The International Journal of Advanced Manufacturing Technology, 2013, 64(1):1297-1311. |
| [6] | ZHANG R Y.Fatigue testing and analysis theory and practice[M].Beijing:National Defense Industry Press, 2011,4:44-76(in Chinese). |
| [7] | STANDARDIZATION ADMINISTRATION OF PEOPLE'S REPUBLIC OF CHINA. GBT26076-2010 Metal sheets and strips-axial-force-controlled fatigue testing method[S].Beijing:China Standard Press, 2011:1-5 (in Chinese). |
| [8] | YANG Z. Fatigue life analysis of a large compressor crankshaft[D]. Shanghai:East China University of Science and Technology, 2014,4:42-50(in Chinese). |
| [9] | TAN X M, ZHANG D F, CHEN Y L, et al. Probabilistic method to predict fatigue life based on crack initiating micro-mechanism of aluminum alloy[J]. Journal of Aeronautical Materials, 2014,34(2):84-89(in Chinese). |
| [10] | WANG X L, SHANGGUAN W B, LIU T K, et al.Experiment of uniaxial tension fatigue and modeling of fatigue life for filled natural rubbers[J].Journal of Mechanical Engineering, 2013,48(7):65-72 (in Chinese). |
| [11] | LI J M,WANG C M,YAN F, et al. Study on microstructure and mechanical properties of 6005a joint in laser mig-hybrid welding[J]. Laster Technology,2014,38(6):733-737(in Chinese). |
| [12] | YILBAS B S, AKHTAR S S, KELES O. Laser cutting of aluminum foam:experimental and model studies[J]. International Journal of Manufacturing and Engineering,2013,135(5):1-9. |
| [13] | PANDEY A K, DUBEY A K. Modeling and optimization of kerf taper in pulsed laser cutting of duralumin sheet[C]//ASME 2012 International Manufacturing Science and Engineering Conference. Notre Dame, Indiana, USA:American Society of Mechanical Engineers, 2012:491-498. |
| [14] | AKHTAR S S. Laser cutting of thick-section circular blanks:thermal stress prediction and micro structural analysis[J]. The International Journal of Advanced Manufacturing Technology, 2014, 71 (3):1345-1358. |
| [15] | HUA Y Q,XIAO T,XUE Q, et al. Experimental study about laster cutting of carbon fiber reninforced polymer[J]. Laster Technology,2013,37(5):565-570(in Chinese). |