[1] ZHANG A F, LI D Ch, LU B H. Research progress in laser direct metal rapid prototying technology[J]. Ordnance Material Science and Engineering, 2007, 30(5):68-72(in Chinese).
[2] HUANG W D, LIN X, CHEN J, et al. Laser solid forming[M]. Xi'an:Northwestern Polytechnical University Press, 2007:1-21(in Chinese).
[3] LI Q H, HU Sh B, LI X Zh, et al. Microstructure heterogenicity and fatigue property of weld joints of TC4 titanium alloy[J]. Journal of Materials Engineering, 2010, 35(1):62-68(in Chinese).
[4] LI X Q. Research on uneven microstructure in Ti-alloy by forging[J]. Heat Treatment of Metals, 2000,28(3):17-20(in Chinese).
[5] WANG T, GUO H Zh, WANG Y W, et al. Effects of heat treatment on microstructural in homogeneity of TG6 alloy hot die forgings[J]. The Chinese Journal of Nonferrous Metals, 2010, 20(1):593-597(in Chinese).
[6] PETZOW G. Metallographisches atzen[M]. Beijing:Popular Science Press, 1982:105-109(in Chinese).
[7] DINDA G P, SONG L, MAZUMDER J. Fabrication of Ti-6Al-4V scaffolds by direct metal deposition[J]. Metallurgical and Materials Transactions, 2008, A39(12):2914-2922.
[8] WU X H, LIANG J, MEI J F, et al. Microstructures of laser-deposited Ti-6Al-4V[J]. Materials and Design, 2004, 25(2):137-144.
[9] DING R, GUO Z X, WILSON A. Microstructural evolution of a Ti-6AL-4V alloy during thermomechanical processing[J]. Materials Science and Engineering, 2002, 327(2):233-245.
[10] NATIONAL STANDARDIZATION TECHNICAL COMMITTEE. GB/T 6611-2008 Terminology and metallographs for titanium and titanium alloys[S]. Beijing:China Standard Press, 2008:1-18(in Ch-inese).
[11] GRIFFITH M L, SCHLIENGER M E, HARWELL L D, et al. Understanding thermal behavior in the LENS process[J]. Materials and Design, 1999, 20(2/3):107-113.
[12] CHEN J, YANG H O, YANG J, et al. The deposition specialty and microstructure of TC4 manufactured by LDMF[J]. Rare Metals, 2003, 23(4):33-37(in Chinese).
[13] THE EDITORIAL BOARD OF CHINA AERONAUTICAL MATERIALS HANDBOOK. China aeronautical materials handbook[M]. Beijing:China Standards Press, 2001:104-107(in Chinese).
[14] AHMED T, RACK H J. Phase transformations during cooling in + titanium alloys[J]. Materials Science and Engineering, 1998, 243(1/2):206-211.
[15] QIAN L, MEI J, LIANG J, et al. Influence of position and laser power on thermal history and microstructure of direct laser fabricated Ti-6Al-4V samples[J]. Materials Science and Technology, 2005, 21(5):597-605.
[16] GIL F J, GINEBRA M P, MANERO J M, et al. Formation of -widmanstatten structure:effect of grain size and cooling rate on the widmanstatten morphologies and on the mechanical properties in Ti6Al4V alloy[J]. Journal of Alloys and Compounds, 2001, 329(1):142-152.
[17] LIN X, LI Y M, WANG M, et al. Columnar to equiaxed transition during alloy solidification[J]. Science in China Series, 2003, E46(5):475-489.