[1] ZHOU X W, WANG X Zh. Application of laser cladding in industrial[J]. Journal of Zhongzhou University, 2005, 22(4): 110-111(in Chinese).
[2] ZHONG M, LIU W. Laser surface cladding:the state of the art and challenges[J].Journal of Mechanical Engineering Science, 2010, 224(5): 1041-1060.
[3] LING Ch H, RENG J R, HE Ch L. Microstructure of in-situ synthesized chromium carbide Ni-base composite coating by laser cladding[J]. Laser Technology, 2014, 38(2): 186-190(in Chinese).
[4] ZHONG M L, NING G Q, LIU W J. Research and development on laser direct manufacturing metallic components[J]. Laser Technology, 2002, 26(5):387-391(in Chinese).
[5] LI Ch X, PENG Sh H, XIE P Sh, et al. The principle and application of rapid prototyping technology[J]. Journal of Gansu University of Technology, 2000, 26(3): 89-92(in Chinese).
[6] ZHOU Zh T. Application of RPM in modern manufacturing[J]. Journal of Compressor Technology, 2008(4): 17-19(in Chinese).
[7] HUANG W D, LIN X, CHEN J, et al. Laser solid forming technology[M].Xi'an: Northwestern Polytechnical University Press, 2007:51-52(in Chinese).
[8] WANG Zh J, DONG Sh Y, XU B Sh, et al. Three-dimensional characterizing technique for geometrical features of single laser cladding[J]. Chinese Journal of Lasers, 2010, 37(2):581-585(in Chinese).
[9] GRIFFITH M L, KEICHER D M, ATWOOD C L, et al. Free form fabrication of metallic components using laser engineered net shaping(LENSTM)[C]//Solid Freeform Fabrication Proceedings. Austin, Texas, USA: University of Texas, 1996:125-131.
[10] GE J B, ZHANG A F, LI D Ch, et al. Process research on DZ125L superalloy parts by laser metal direct forming[J]. Chinese Journal of Lasers, 2011, 38(7):41-46(in Chinese).
[11] ZHU G X, ZHANG A F, LI D Ch, et al. Effect of process parameters on surface smoothness in laser cladding[J]. Chinese Journal of Lasers, 2010, 37(1):296-301 (in Chinese).
[12] WANG X Y, JING H, XU W J, et al. Laser cladding forming of are-section inclined thin-walled parts with variable z-increments[J]. Chinese Journal of Lasers, 2011, 38(10):78-84(in Chinese).
[13] WANG X Y, GUO H R, XU W J, et al. Laser cladding forming of a ramp thin wall with variable powder feed rate[J]. China Mechanical Engineering, 2011, 22(6):701-705(in Chinese).
[14] CHRYSSOLOURIS G, ZANNIS S, TSIRBAS K, et al. An experimental investigation of laser cladding[J]. CIRP Annals-Maunfactu-ring Technology, 2002, 51(1):145-148.
[15] LEE H K. Effect of the cladding parameters on the deposition efficiency in pulsed Nd:YAG laser cladding[J]. Journal of Materials Processing Technology, 2008, 202 (1/3): 321-327.