[1] STEEN W M, EBOO M. Arc augmented laser welding [J]. Metal Construction, 1979, 11(7): 332-335.
[2] STEEN W M. Arc augmented laser processing of materials [J]. Journal of Application Physics, 1980, 51(11): 5636-5641.
[3] TUSEK J, SUBAN M. Hybrid welding with arc and laser beam [J]. Science and Technology of Welding and Joining, 1999, 4(5): 308-311.
[4] ONO M, SHINBO Y, YOSHITAKE A, et al. Development of laser-arc hybrid welding [J]. NKK Technology Review, 2002, 86(1): 8-12.
[5] BAGGER C, OLSEN F O. Review of laser hybrid welding [J]. Journal of Laser Applications, 2005, 17(1): 2-14.
[6] HU B, DEN G. Laser induced stabilization of the welding arc [J]. Science and Technology of Welding and Joining, 2005, 10(1): 76-81.
[7] GAO M, ZENG X Y, YAN J. CO2 laser-pulsed MAG hybrid welding of mild steel. Laser Technology, 2006, 30(5): 498-500(in Chinese).
[8] CHEN Y B, LI L Q, WU L. Quantitative measurement of absorption and defocusing of laser beam by electric arc [J]. Transactions of the China Welding Institution, 2003, 24(3): 56-58(in Chinese).
[9] LI F. Application of laser hybrid welding and laser brazing in VW-Phaeton and Audi A8 [J]. Machinist Metal Forming, 2008(14): 31-34(in Chinese).
[10] JEFF D. Practical applications for hybrid laser welding [J]. Welding Journal, 2007, 86(10): 47-51.
[11] YUAN X C, ZHAO H, WANG P P. Research and application of laser arc hybrid welding technology [J]. Welding Technology, 2010, 39(5): 2-7(in Chinese).
[12] CHEN Y B, LEI Z L, LI L Q, et al. Welding characteristics in different laser-TIG hybrid manners [J]. China Welding, 2004, 13(1): 41-45.
[13] PAGE C J, DEVERMANN B J, BLUNDELL N. Plasma augmented laser welding and its applications [J]. Science and Technology of Welding and Joining, 2002, 7(1): 1-10.
[14] JIN X, BERGER P, GRAF T. Multiple reflections and Fresnel absorption in an actual 3-D keyhole during deep penetration laser welding [J]. Journal of Physics, 2006, D39(21): 4703.
[15] CHENG Y, JIN X, LI S, et al. Fresnel absorption and inverse bremsstrahlung absorption in an actual 3-D keyhole during deep penetration CO2 laser welding of aluminum 6016 [J]. Optics & Laser Technology, 2012, 44(5): 1426-1436.
[16] RIBIC B, RAI R, DEBROY T. Numerical simulation of heat transfer and fluid flow in GTA/laser hybrid welding [J]. Science and Technology of Welding & Joining, 2008, 13(8): 683-693.
[17] RAYES M, WALZ C, SEPOLD G. The influence of various hybrid welding parameters on bead geometry [J]. Welding Journal, 2004, 83(5): 147 -153.
[18] SIEMROTH P, SCHEIBE H J. The method of laser-sustained arc ignition [J]. IEEE Transactions on Plasma Science, 1990, 18(6): 911-916.
[19] WEBSTER S. Hyblas: economical and safe laser hybrid welding of structural steel-final report [M]. Brussels, Belgium: Directorate-General for Research Information and Communication Unit European Commission, 2009:2-10.
[20] WEBSTER S, KRISTENSEN J K, PETRING D. Joining of thick section steels using hybrid laser welding [J]. Ironmaking and Steelmaking, 2008, 35(7): 496-504.
[21] WESTIN E M, STELLING K, GUMENYUK A. Single-pass laser-GMA hybrid welding of 13.5mm thick duplex stainless steel [J]. Welding in the World, 2011, 55(1/2): 39-49.
[22] NORMAN P M, KARLSSON J, KAPLAN A F H. Mechanisms forming undercuts during laser hybrid arc welding [J]. Physics Procedia, 2011, 12(1): 201-207.
[23] MORADI M, GHOREISHI M, FROSTEVARG J, et al. An investigation on stability of laser hybrid arc welding [J]. Optics and Lasers in Engineering, 2013, 51(4): 481-487.
[24] LAMAS J, KARLSSON J, NORMAN P, et al. The effect of fit-up geometry on melt flow and weld quality in laser hybrid welding [J]. Journal of Laser Applications, 2013, 25(3): 032010.
[25] DENNEY P E, FALLARA P M, BROWN L E. Hybrid laser weld development for shipbuilding applications [C]// Proceedings of Ship Production Symposium and Expo. Ypsilanti, Michigan, USA: Ship Production Symposium and Expo, 2002: 25-27.
[26] SUGA T, MURAI Y, KOBASHI T, et al. Research on laser-arc hybrid welding of Ht780 steel [J]. Welding in the World, 2012, 56(11/12): 105-118.
[27] WALLACE J. Materials processing:100kW fiber laser, power meter serve industry.Laser Focus World, 2013, 49(12): 13-14.
[28] LEI Z, QIN G L, LIN Sh Y, et al. Fusion-brazing joining for dissimilar metals between 5A02 aluminium alloy and zinc-coated steel based on laser-MIG hybrid welding [J]. Chinese Journal of Mechanical Engineering, 2009, 45(3): 94-98 (in Chinese).
[29] LIN Sh Y. Laser arc welding new technology and application[C]//The Second Civil Aircraft Manufacturing Technology and Equipment Forum. Beijing, China: Chinese Mechanical Engineering Society, 2010: 1-2 (in Chinese).
[30] WANG W, LIN S Y, WANG X Y, et al. Double electric conduction mechanism of Nd:YAG laser-pulse MAG hybrid welding [J]. Chinese Journal of Lasers, 2012, 39(2): 50-59(in Chinese).
[31] GAO M, ZENG X Y, YAN J, et al. Heat sources interaction of laser-arc hybrid welding [J]. Laser Technology, 2007, 31(5): 465-468 (in Chinese).
[32] GAO M. Study on technology, mechanism and quality controlling of CO2 laser-arc hybrid welding [D]. Wuhan: Huazhong University of Science & Technology, 2007: 124-125(in Chinese).
[33] YAN J. Study on Technology, Defects and joint quality by fiber laser- arc hybrid welding high strength aluminum alloys [D]. Wuhan: Huazhong University of Science & Technology, 2011: 25-102(in Chinese).
[34] WANG J. Study on the technology and plasma behaviour during the fiber laser and laser hybrid welding of aluminum alloy [D]. Wuhan: Huazhong University of Science & Technology,2012: 139-141(in Chinese).
[35] KANG L, HUANG R S, LIU L M, et al. Low-power YAG laser-MAG arc hybrid welding of stainless steel [J]. Transactions of the China Welding Institution, 2007, 28(11): 69-72(in Chinese).
[36] LIU L, HUANG R, SONG G, et al. Behavior and spectrum analysis of welding arc in low-power YAG-laser-MAG hybrid-welding process [J].IEEE Transactions on Plasma Science, 2008, 36(4): 1937-1943.
[37] LIU F D, ZHANG H, WANG Y Q, et al. Influence of area energy for welding seam and droplet transfer on hybrid laser-arc welding [J]. Chinese Journal of Mechanical Engineering, 2012, 48(14): 84-90(in Chinese).
[38] LIU F D, ZHANG H, DU S Y, et al. Influence of laser power on arc and droplet behaviors in droplets on CO2 laser-MAG arc hybrid welding [J]. Chinese Journal of Mechanical Engineering, 2013, 49(4): 75-82(in Chinese).
[39] DILTHEY U, WIESSCHEMANN U. Perspectives offered by combining and coupling laser beam and arc welding [J]. Welding International, 2002, 16(9): 711-719.
[40] ARIAS J L, ROMERO P, VANDEWYNCKELE A, et al. Laser-TIG hybrid welding of very thin austenitic stainless steel sheets [C] // Proceedings of the 24th International Conference on Applications of Lasers and Electro-Optics. Orlando, FL, USA: Laser Institute of America, 2005: 104-107.
[41] NAITO Y, MIZUTANI M, KATAYAMA S. Penetration characteristics in YAG laser and TIG arc hybrid welding, and arc and plasma/plume behaviour during welding. Welding phenomena in hybrid welding using YAG laser and TIG arc (First Report) [J]. Welding International, 2006, 20(10): 777-784.
[42] CHEN Y B, CHEN J, LI L Q, et al. Properties of arc and weld in laser-TIG hybrid process [J]. Transactions of the China Welding Institution, 2003, 24(1): 55-56(in Chinese).
[43] TAN C, LI L, CHEN Y, et al. Laser-tungsten inert gas hybrid welding of dissimilar metals AZ31B Mg alloys to Zn coated steel [J]. Materials & Design, 2013, 49: 766-773.
[44] LIU L, CHEN M, LI C. Effect of electric arc on laser keyhole behavior based on direct observation during low power pulsed laser-arc hybrid welding process [J]. Optics and Lasers in Engineering, 2013, 51(10): 1153-1160.
[45] LIU L M, YUAN S T, LI C B. Effect of relative location of laser beam and TIG arc in different hybrid welding modes [J]. Science and Technology of Welding & Joining, 2012, 17(6): 441-446.
[46] XIAO R Sh, WU S K. Progress on laser-arc hybrid welding [J]. Chinese Journal of Lasers, 2008, 35(11): 1680-1685(in Chinese).
[47] ZHANG Y, LI S C, JIN X Z, et al. Research on the key technology of laser welding of galvanized steel [J]. Laser & Optoelectronics Progress, 2010(7): 37-45(in Chinese).
[48] MEI L F, CHEN G Y, JIN X Z, et al. Study on fiber laser overlap-welding of automobile aluminum alloy [J]. Chinese Journal of Lasers, 2010, 37(8): 2091-2097(in Chinese).
[49] YANG S, CARLSON B, KOVACEVIC R. Laser welding of high-strength galvanized steels in a gap-free lap joint configuration under different shielding conditions [J]. Welding Journal, 2011, 90(1): 8-18.
[50] KUJANPÄÄ V. Short overview of laser applications in automotive manufacturing [C] // Pro-Factory Brokerage Meeting. Gothenburg, Sweden: EUREKA, 2008: 10-11.
[51] STAUFER H, RUHRNOSSL M, MIESSBACHER G. Laser hybrid welding and laser brazing: state of the art in technology and practice by examples of Audi A8 and VW-Phaeton [C] // Proceedings of the Third International WLT Conference on Lasers in Manufacturing. Stuttgart, Germany: AT-Fachverlag, 2005: 203-208.
[52] THOMY C, VOLLERTSEN F. Laser-MIG hybrid welding of aluminium to steel-effect of process parameters on joint properties [J]. Welding in the World, 2012, 56(5/6): 124-132.
[53] QIN G L, SU Y H, WANG S J. Microstructures and properties of pulsed MIG arc brazeing-fusion welding joint of Al alloy and galvanized steel [J]. Acta Metallurgica Sinica, 2012, 48(8): 1018-1024.
[54] LEI Z, QIN G L, LIN S Y, et al. Fusion-brazing joining for dissimilar metals between 5A02 aluminium alloy and zinc-coated steel based on laser-MIG hybrid welding [J]. Journal of Mechanical Engineering, 2009, 45(3): 94-98.