[1] SCINTILLA L D, TRICARICO L. Estimating cutting front temperature difference in disk and CO2 laser beam fusion cutting[J]. Optics Laser Technology, 2012, 44(5):1468-1479.
[2] PANDEY A K, DUBEY A K. Simultaneous optimization of multiple quality characteristics in laser cutting of titanium alloy sheet[J]. Optics Laser Technology, 2012, 44(6):1858-1865.
[3] MUHAMMADA N, WHITEHEADA D, BOORB A, et al. Comparison of dry and wet fibre laser profile cutting of thin 316L stainless steel tubes for medical device applications[J]. Journal of Materials Processing Technology, 2010, 210(15): 2261-2267.
[4] CHOUDHURY I A, SHIRLEY S. Laser cutting of polymeric materials: an experimental investigation [J]. Optics Laser Technology, 2010, 42(3):503-508.
[5] WANG X H, YAO J H, ZHOU G B, et al. Numerical simulation and experiment of laser cutting liquid crystal display glass substrates[J]. Chinese Journal of Lasers, 2011, 38(6): 1-5 (in Chinese).
[6] CHEN X Ch, JI L F, BAO Y, et al. Improving cutting quality by analysis of microstructure characteristics and solidification behaviour of recast layer formation on laser cut ceramic[J]. Journal of the European Ceramic Society, 2012, 32(10): 2203-2211.
[7] JI L F, YAN Y Zh, BAO Y, et al. Crack-free cutting of thick and dense ceramics with CO2 laser by single-pass process[J]. Optics and Lasers in Engineering, 2008, 46(10): 785-790.
[8] ELTAWAHNI H A, ROSSINI N S, DASSISTI M, et al. Evalaution and optimization of laser cutting parameters for plywood materials[J]. Optics and Lasers in Engineering, 2013, 51(9): 1029-1043.
[9] RIVEIRO A, QUINTERO F, LUSQUIN~OS F, et al. Experimental study on the CO2 laser cutting of carbon fiber reinforced plastic composite[J]. Composites, 2012, A43(7):1400-1409.
[10] LAMIKIZ A, LPEZ de LCALLE L N, SANCHEZ J A, et al. CO2 laser cutting of advanced high strength steels (AHSS)[J]. Applied Surface Science, 2005, 242(3/4): 362-368.
[11] KIM M J. 3-D finite element analysis of evaporative laser cutting[J]. Applied Mathematical Modelling, 2005,29(10):938-954.
[12] YILBAS B S. Laser cutting of thick sheet metals: Effects of cuttingparameters on kerf size variations[J]. Journal of Materials Processing Technology, 2008, 201(1/3):285-290.
[13] YAN C, LI L J, LI J, et al. Review of surface quality study on laser sheets cutting[J]. Laser Technology, 2005, 29(3):270-274 (in Chinese).
[14] TONG G, XU H, YU H Q. Control model of laser cutting quality based on simulated annealing and BP neural network [J]. Machinery Design Manufacture, 2012(6):85-87 (in Chinese).
[15] LIU J, GUO Q D,WANG Y H. Optimizing the laser-cutting parameters by using improved artificial neural network [J]. Laser Journal,2007, 28(6): 80-81 (in Chinese).
[16] WU Y H, ZHANG Y Q, CHEN W Zh, et al. Application of RBF Neural Network in three dimensional laser cutting[J].China Mechanical Engineering, 2006, 17(12): 1234-1237(in Chinese).
[17] LIU Y, XU D, TAN M. A genetic algorithm based artificial neural network approach for parameter selection of laser cutting [J]. Manufacturing Automation, 2006, 28(12): 20-22(in Chinese).
[18] CHEN J M, ZUO T Ch. Analysis of artificial neural network on 3-D orientation CO2 laser cutting [J]. Chinese Journal of Lasers, 2004, 31(3): 245-248 (in Chinese).
[19] FENG W J, QIN F D, CHEN Y Y, et al. Analysis of technological parameter for laser cutting stainless steel sheet[J]. Machinery Design Manufacture, 2011(11):191-192(in Chinese).
[20] RIVEIRO A, QUINTERO F, LUSQUIN~OS F, et al. Influence of assist gas nature on the surfaces obtained by laser cutting of Al-Cu alloys [J]. Surface Coatings Technology,2010, 205(7): 1878-1885.
[21] YANG D H, MA L, HUANG W D. Component's surface quality predicitons by laser rapid forming based on artifical neural networks[J].Chinese Journal of Lasers, 2011, 38(8): 1-5 (in Chinese).
[22] YU J H, LI X N, ZHAI Y, et al. BP ANN model for annealing parameter and hardness of zirconium base alloy[J]. Rare Metal Materials and Engineering, 2012, 41(8): 1346-1350 (in Chinese).