| [1] | REA E C,Jr. Scribing of thin sapphire substrates with a 266nm Q-switched solid-state laser [J].Proceedings of the SPIE,2004,5339:231-240. |
| [2] | JUODKAZIS S, NISHIMURA K, MISAWA H. In-bulk and surface structuring of sapphire by femtosecond pulses [J]. Applied Surface Science, 2007, 253(15):6539-6544. |
| [3] | QI L, NISHII K, YASUI M, et al. Femtosecond laser ablation of sapphire on different crystallographic facet planes by single and multiple laser pulses irradiation [J]. Optics and Lasers in Engineering, 2010, 48(10):1000-1007. |
| [4] | ASHKENASI D, ROSENFELD A, VAREL H, et al. Laser processing of sapphire with picosecond and sub-picosecond pulses [J]. Applied Surface Science, 1997, 120(1/2):65-80. |
| [5] | HAN J, LI C, ZHANG M, et al. An investigation of long pulsed laser induced damage in sapphire [J]. Optics & Laser Technology, 2009, 41(3):339-344. |
| [6] | CHANG Q L, LIANG W W, HONG B Z, et al.Analysis of fracture surface for sapphire cut by long pulse laser [J]. Journal of Synthetic Crystals, 2010, 39(4):996-1001. |
| [7] | HE G T, WEI X, XIE X Zh, et al. Experimental measurement of absorptivity of sapphire at 532nm laser radiation [J]. Laser Technology, 2011, 35(1):54-57(in Chinese). |
| [8] | XIE X Zh, WEI X, HU W. Effect of linear polarized CO2 lasers on cut kerfs of nonmetallic material [J]. Laser Technology, 2008, 32(4):399-401 (in Chinese) . |
| [9] | READY J F. LIA handbook of laser materials processing [M]. New York,USA: Springer-Verlag,2001:425-470. |
| [10] | BOVATSEK J M, PATEL R S.Highest-speed dicing of thin silicon wafers with nanosecond-pulse 355nm q-switched laser source using line-focus fluence optimization technique [J].Proceedings of the SPIE,2010, 7585:75850. |
| [11] | XIE X Zh, LI L J, WEI X, et al. Evaporative front of laser cutting PMMA [J]. Chinese Journal of Lasers, 2008, 35(6):924-930(in Chinese). |
| [12] | HUANG F M, XIE X Zh, WEI X H, et al.Newly developed techniques for laser dicing wafer[J]. Laser Technology, 2012, 36(3): 293-297(in Chinese ). |
| [13] | LI X Y, ZENG X Y, LIU Y, et al. Study of YAG laser cutting process with stainess steel sheet[J]. Chinese Journal of Lasers, 2011, A28(12):1125-1129 (in Chinese). |
| [14] | IWAI Y, MIZUNO T, ARAI T, et al. Scribing characteristics of ceramics with Nd：YLF laser [J].Proceedings of the SPIE,2003,5063:509-513. |